Steel Tanks - Safe and Secure Bunded Steel Tanks

Things to know about Steel Storage Tanks:-

The steel tanks to comply with BS799-5 and EN 12285 - 2 Class A, and to be manufactured under a quality assurance system complying with ISO9001.
Top outlet draw off pipes and feed lines are provided where possible.
Remote fill points are not recommended, but if unavoidable should comply with the requirements of the regulations.
Where possible, air vent pipes should be positioned so they can be seen during delivery.
It is recommended that pump sets should be installed within the secondary containment system.
Inspect all bunds, tanks and pipework regularly for signs of damage, at least weekly.
Oil storage areas should be as resistant as possible to unauthorised interference and vandalism.
Keep a stock of absorbent materials on site to deal with spillages.
Use a drip tray under filling points when refuelling.