• display as grid Grid
  • display as list List
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |

GROZ PARTICLE CARTRIDGE
GROZ PARTICLE CARTRIDGE
GROZ PARTICLE CARTRIDGE This particle paper cartridge with a drain port for easy removal of filtered impurities. Primarily used in gravity systems but also suitable for low flow pump installations. Specification:- Suitable for diesel, petrol and B20 Gravity Flow or Lo Flow Pump 10 micron Max flow rate 60 lpm Max bar 3.5
€17.86 ex VAT
(€21.97 inc VAT)
GROZ PARTICLE FILTER
GROZ PARTICLE FILTER
GROZ PARTICLE FILTER This particle fuel filter has a clear bowl containing a paper cartridge with a drain port for easy removal of filtered impurities. Primarily used in gravity systems but also suitable for low flow pump installations. The complete filter kit contains one head and one element. Specification:- Suitable for diesel, petrol and B20 Gravity Flow or Lo Flow Pump 10 micron Max...
€44.57 ex VAT
(€54.82 inc VAT)

GROZ WATER AND PARTICLE CARTRIDGE
GROZ WATER AND PARTICLE CARTRIDGE
GROZ WATER AND PARTICLE CARTRIDGE This water and particle paper cartridge with a drain port for easy removal of filtered impurities. Primarily used in gravity systems but also suitable for low flow pump installations. Specification:- Suitable for diesel, petrol and B20 Gravity Flow or Lo Flow Pump 10 micron Max flow rate 60 lpm Max bar 3.5
€20.29 ex VAT
(€24.96 inc VAT)
GROZ WATER AND PARTICLE FILTER
Best Seller
GROZ WATER AND PARTICLE FILTER
GROZ WATER AND PARTICLE FILTER This water and particle fuel filter has clear bowl containing a paper cartridge with a drain port for easy removal of filtered impurities. Primarily used in gravity systems but also suitable for low flow pump installations. The complete filter kit contains one head and one element. Specification:- Suitable for diesel, petrol and B20 Gravity Flow or...
€48.86 ex VAT
(€60.10 inc VAT)

WATER SEPARATOR 150-30 FUEL FILTER
WATER SEPARATOR 150-30 FUEL FILTER
WATER SEPARATOR 150-30 DIRT FUEL FILTER Max 150 L/M with 1'' ports The delivery fuel filter is a water absorbing cartridge for oil and diesel. These fuel filters guarantee the fundamental protection of motors using fuel station dispensing diesel. The absorbtion of water, however gradual, causes a reduction in filtering capacity.
€107.43 ex VAT
(€132.14 inc VAT)
WATER SEPARATOR 150-30 FUEL CARTRIDGE
WATER SEPARATOR 150-30 FUEL CARTRIDGE
WATER SEPARATOR 150-30 DIRT FUEL CARTRIDGE Max 150 L/M with 1'' ports The delivery fuel replacement cartridge is a water absorbing cartridge. These fuel filters guarantee the fundamental protection of motors using fuel station dispensing diesel. The absorbtion of water, however gradual, causes a reduction in filtering capacity.
€92.86 ex VAT
(€114.22 inc VAT)

CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 FILTER 10 MICRON WATER BLOCK Cim-Tek Filtration, the world leader in fuel filter technology. They offer the ideal solution to ULSD Diesel filtration with the patented HydroSorb range of filters for particles and water removal. HydroSorb has a high particle and water holding capacity to ensure cleaner fuel Filter part number - CT70062 10 Micron with water block 1''...
€59.86 ex VAT
(€73.63 inc VAT)
CIM-TEK HYDROSORB 70062 CARTRIDGE 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 CARTRIDGE 10 MICRON WATER BLOCK
CIM-TEK HYDROSORB 70062 CARTRIDGE 10 MICRON WATER BLOCK Cim-Tek Filtration, the world leader in fuel filter technology. They offer the ideal solution to ULSD Diesel filtration with the patented HydroSorb range of filters for particles and water removal. HydroSorb has a high particle and water holding capacity to ensure cleaner fuel Filter part number - CT70062 10 Micron with water block 1''...
€55.71 ex VAT
(€68.52 inc VAT)

BRASS Y STRAINER
BRASS Y STRAINER
BRASS Y STRAINER Available in 1'', 1 1/2'', 2'' or 3'' In-line strainer designed to be fitted before the pump inlet. Removable wire mesh filter for easy cleaning. 800 Micron rated.
from €17.14 ex VAT
(€21.08 inc VAT)
PIUSI FOOT VALVE & HOSE TAIL
PIUSI FOOT VALVE & HOSE TAIL
PIUSI FOOT VALVE & HOSE TAIL The Piusi Plastic Foot Valve and Strainer is a spring loaded non return valve, which thanks to its strainer makes sure that the pumping system is not damaged by any large impurities in the fuel. Specification: For diesel, oil and gas 1'' with built-in safety valve Mesh filter for diesel fuel residues Clear indications for opening and closing...
€21.86 ex VAT
(€26.89 inc VAT)

PIUSI LINE FILTERPIUSI LINE FILTER
PIUSI LINE FILTER
PIUSI LINE FILTER The Piusi Line Filter is designed to protect the inlet side of a pumping installation with its washable, removable wire mesh filter element and flanged connections. However, this particle fuel filter also helps to change the inlet/outlet orientation, reduce the obstruction size of a 90?_ connection and act as a spillback device/line priming device to reduce system pressure. The...
€30.00 ex VAT
(€36.90 inc VAT)
PIUSI DEPUROIL OIL FILTER UNIT
PIUSI DEPUROIL OIL FILTER UNIT
PIUSI DEPUROIL OIL FILTER UNIT DEPUROIL is the ideal tool for decontaminating oil by removing suspended particles. The unit's application is in situations where hydraulic systems or machinery lubrication requires that the circulating oil be free from impurities. The filtering unit is composed of a volumetric vane pump that suctions the oil to be purified, sending it through a high-filtering...
from €767.14 ex VAT
(€943.58 inc VAT)

PIUSI FILTROLL FILTERING UNIT
PIUSI FILTROLL FILTERING UNIT
PIUSI FILTROLL FILTERING UNIT This fuel filtering unit provides double filtering for diesel fuel and absorbs any water and impurities. The unit features a supply and suction pipe with integrated bottom valve. Features:- Sturdy wheel construction with large diameter wheels Flow rate 56 l/min Filtering capacity - first stage 30 microns with water absorption, second stage 5 microns...
€1,198.57 ex VAT
(€1,474.24 inc VAT)
STANDARD NOZZLE & SWIVEL HEAD
STANDARD NOZZLE & SWIVEL HEAD
STANDARD NOZZLE & SWIVEL HEAD These standard fuel nozzles are based on low resistance and are remarkably easy to use. These diesel nozzles are designed to be used with any type of transfer system, even those run by gravity. Sturdy nozzle c/w 1'' swivel connector and trigger lock Suitable for flow rates up to 120 l/m 5 bar pressure 25mm dia spout These nozzles are designed...
€32.14 ex VAT
(€39.53 inc VAT)

A60 AUTO NOZZLE & SWIVEL HEADA60 AUTO NOZZLE & SWIVEL HEAD
A60 AUTO NOZZLE & SWIVEL HEAD
A60 AUTOMATIC NOZZLE & SWIVEL HEAD The A60 nozzle is fitted with a device that automatically shuts off the flow of fuel when the tank is full. Complete with 1'' BSP swivel connector, it conforms to the strictest safety requirements and certifications.
€84.29 ex VAT
(€103.68 inc VAT)
3 METRE HOSE KIT
3 METRE HOSE KIT
3m HOSE KIT Supplied with swaged fittings, swivel nozzle and 1'' lever valve
€101.43 ex VAT
(€124.76 inc VAT)

4 METRE FUEL DELIVERY HOSE
4 METRE FUEL DELIVERY HOSE
4 METRE FUEL DELIVERY HOSE 4 metre fuel dispensing hose. Suitable for delivering diesel fuel up to 10 Bar pressure. 3/4'' hose with 1'' BSP fittings.
€62.86 ex VAT
(€77.32 inc VAT)
4 METRE HOSE KIT
Best Seller
4 METRE HOSE KIT
4m HOSE KIT Supplied with swaged fittings, swivel nozzle and 1" lever valve
€109.29 ex VAT
(€134.43 inc VAT)

6 METRE FUEL DELIVERY HOSE
6 METRE FUEL DELIVERY HOSE
6 METRE FUEL DELIVERY HOSE Suitable for dispensing diesel fuel. Tested to 10 Bar pressure. 3/4'' hose + 1'' BSP fittings.
€55.71 ex VAT
(€68.52 inc VAT)
6 METRE HOSE KIT
6 METRE HOSE KIT
6m HOSE KIT Supplied with swaged fittings, swivel nozzle and 1" lever valve
€117.15 ex VAT
(€144.09 inc VAT)

ANGLE VALVE HOSE KIT
ANGLE VALVE HOSE KIT
ANGLE VALVE HOSE KIT This angle valve hose kit can be used for gravity flow tank installations. Comes with: Piusi Self 2000 manual nozzle Supplied with 1" angle valve with tapered thread Integrated locking device Available in 3m, 4m and 6m lengths
from €103.14 ex VAT
(€126.86 inc VAT)
A120 AUTO NOZZLE & SWIVEL HEADA120 AUTO NOZZLE & SWIVEL HEAD
A120 AUTO NOZZLE & SWIVEL HEAD
A120 AUTO NOZZLE & SWIVEL HEAD The A120 nozzle is fitted with a device that automatically shuts off the flow of fuel when the tank is full. Complete with 1"BSP swivel connector, it conforms to the strictest safety requirements and certifications. It is suitable as a fuel nozzle for both gas and diesel.
€122.86 ex VAT
(€151.12 inc VAT)

DIESEL SUCTION HOSE
DIESEL SUCTION HOSE
DIESEL SUCTION HOSE The Diesel Suction Hose is a sturdy and durable solution for fuel pump installations thanks to its strong, shock resistant reinforcement. Whilst this diesel suction hose is primarily designed for suction applications, it can also be used as a fuel delivery hose. This abrasion and weather resistant fuel suction hose can also be submerged into diesel should the application require...
from €45.21 ex VAT
(€55.61 inc VAT)
PIUSI ATEX AUTOMATIC NOZZLE
PIUSI ATEX AUTOMATIC NOZZLE
PIUSI ATEX AUTOMATIC NOZZLE Piusi Atex Automatic nozzles are fitted with a device that automatically shuts off flow when the tank is full. Complete with swivel connector they conform to the strictest safety requirements and bear all necessary certifications. The Piusi Automatic ATEX Fuel Nozzle has been specially designed for the safe dispensing of diesel, petrol or kerosene in flammable environments...
€147.14 ex VAT
(€180.98 inc VAT)

PIUSI HOSE REEL 1 inch
PIUSI HOSE REEL 1 inch
PISUI HOSE REEL 1'' Hose reel for diesel and oil supply hoses. Through careful design, Piusi have been able to limit pressure loss and facilitate use in this hose reel, even for high flow pumps like diesel refuelling systems. Features: Reduced pressure loss through the proper sizing of the hydraulic system Protective latch mechanism that prevents accidental contact with the...
€410.00 ex VAT
(€504.30 inc VAT)
PIUSI HOSE REEL 3/4 inch
PIUSI HOSE REEL 3/4 inch
PIUSI HOSE REEL 3/4'' Hose reel for diesel and oil supply hoses. Through careful design, Piusi have been able to limit pressure loss and facilitate use in this hose reel, even for high flow pumps like diesel refuelling systems. Features: Reduced pressure loss through the proper sizing of the hydraulic system Protective latch mechanism that prevents accidental contact with...
€394.29 ex VAT
(€484.98 inc VAT)

19'' Retrofit Green Screw Cap
19'' Retrofit Green Screw Cap
19'' RETROFIT GREEN SCREW CAP 19 inch retrofit lid includes sealant lid
€96.11 ex VAT
(€118.22 inc VAT)
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin) The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
€35.42 ex VAT
(€43.57 inc VAT)

OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP This part was Green on most tanks when first produced - screws into place.
€16.75 ex VAT
(€20.60 inc VAT)
Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16" (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks. Old style red arm hinged lid.
€92.42 ex VAT
(€113.68 inc VAT)

Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank onlyReplacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only Fits onto the tank inspection point/inlet. Fits all Atlas Single Skin and Bunded Tanks
€36.71 ex VAT
(€45.15 inc VAT)
Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16" lid (approx. dimension) - ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point. Supplied complete with: Lockable Plastic Manhole Lid Retention Ring Weatherproof Gasket Fits Older Atlas and Titan Bunded Tanks.
€83.76 ex VAT
(€103.02 inc VAT)

Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only. New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks Comes complete with hinge Please Note: These lids are not interchangeable between old & new tanks
€52.58 ex VAT
(€64.67 inc VAT)
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16'' HINGED OIL TANK LID GREEN Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid. Includes the gasket 000325. This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
€92.42 ex VAT
(€113.68 inc VAT)

Titan 19 inch Oil Tank LidTitan 19 inch Oil Tank Lid
Titan 19 inch Oil Tank Lid
TITAN 19'' OIL TANK LID Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only. This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
€77.43 ex VAT
(€95.24 inc VAT)
TITAN 24''??OIL TANK LIDTITAN 24''??OIL TANK LID
TITAN 24''??OIL TANK LID
TITAN 24'' OIL TANK LID Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
€107.24 ex VAT
(€131.91 inc VAT)

TITAN 4'' OIL TANK LIDTITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style). Please Note: Only the lower rubber seal is included in this product.

5

€37.94 ex VAT
(€46.67 inc VAT)
Titan Oil Tank 2 inch Vent Cap
Titan Oil Tank 2 inch Vent Cap
TITAN OIL TANK 2'' VENT CAP Replacement 2'' vent cap for TITAN oil tanks only.
€19.38 ex VAT
(€23.84 inc VAT)

TITAN OIL TANK 6'' INSPECTION CAPTITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP Replacement cap for TITAN oil tanks only. Fits onto the tank inspection point/inlet (new style).
€37.94 ex VAT
(€46.67 inc VAT)
GRP KIOSK - SINGLE DOORGRP KIOSK - SINGLE DOOR
GRP KIOSK - SINGLE DOOR
GRP KIOSK - SINGLE DOOR These Glass Reinforced Kiosks come complete with vents on both sides. Suitable to sewage treatment tanks, pumps, and electrical equipment. Weatherproof black gasket neoprene and 12mm plywood mounting backboards are fitted as standard. Doors are reinforced to provide a high level of security and are dust proof and weather proof. Hign Quality handmade products Stainless...
€POA

TIGERLOOP ORIGINAL
TIGERLOOP ORIGINAL
TIGERLOOP ORIGINAL The new and improved third generation automatic oil de-aerator. The Tigerloop pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump. The TigerLoop De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the...
€59.98 ex VAT
(€73.78 inc VAT)
Top Outlet valve for Oil TanksTop Outlet valve for Oil Tanks
Top Outlet valve for Oil Tanks
Top Outlet Valve for Bunded Oil Tanks Comes supplied with: Flexible suction pipe and float Red valve lever Oil supply connection for pipe Return inlet connection (if required) Connection Dia. 3/8” to take 6/8/10mm pipework
€43.45 ex VAT
(€53.44 inc VAT)

TIGERLOOP BIO
TIGERLOOP BIO
TIGERLOOP BIO The new and improved third generation automatic oil de-aerator. The Tigerloop Bio pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump. The Tigerloop Bio is used in combination with a separate oil filter. The benefits of Tigerloop are applicable anywhere you use a light oil burner. The Tigerloop Bio is...
€86.60 ex VAT
(€106.52 inc VAT)
TIGERLOOP COMBI
TIGERLOOP COMBI
TIGERLOOP COMBI The new Tigerloop Combi offers several advantages thanks to the integrated oil filter. The installation is done with fewer connections, simplifying work and reducing the risk for leakage. The Tigerloop pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump. The benefits of Tigerloop are applicable anywhere...
€138.55 ex VAT
(€170.42 inc VAT)

SPILLSTOP OVERFILL PREVENTION VALVE
SPILLSTOP OVERFILL PREVENTION VALVE
SPILLSTOP OVERFILL PREVENTION VALVE The SpillStop 2" Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any...
from €87.00 ex VAT
(€107.01 inc VAT)
CIM-TEK TANK DRYER
CIM-TEK TANK DRYER
CIM-TEK TANK DRYER Cim-Tek Tank Dryer removes water from your fuel storage tank Cim-Tek Filtration Tank Dryer absorbs water from the bottom of your fuel tank. It contains super- absorbent polymer Removes water from diesel, biodiesel, gas and fuel oil Effective in as little as 24 hours Reduces engine downtime and maintenance costs Tank opening diameter 2' or over Holds up to...
€33.57 ex VAT
(€41.29 inc VAT)

1' TANK REDUCER
1' TANK REDUCER
1" TANK REDUCER 25mm reducer
€17.01 ex VAT
(€20.92 inc VAT)
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
BOTTOM OUTLET KIT (Oil Tank Fitting Kit) This kit includes practically everything you need to connect your heating oil tank to the supply pipe. Includes the following: Isolation ball valve 52 micron disposable nylon filter element 10mm copper compression fitting outlet 1" male BSPT tank fitting adaptor Roll of PTFE tape
€33.00 ex VAT
(€40.59 inc VAT)
Page: | 1 | 2 | 3 | 4 | 5 | 6 | 7 |