Kingspan Parts

Kingspan Parts

  • display as grid Grid
  • display as list List
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 |

110MM BLANKING CAP
110MM BLANKING CAP
110MM BLANKING CAP PVC Plastic Closing Cap To suit standard sewage piping
€25.78 ex VAT
(€31.71 inc VAT)
BIOFICIENT FILTER MEDIABIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media. The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
from €136.24 ex VAT
(€167.58 inc VAT)

JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120) This Secoh JDK Connector is for all models from 60 - 120. It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
€35.87 ex VAT
(€44.12 inc VAT)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-Pressure Relief Valve (150-500) This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged. Original Black Rubber 90 Degree Hose 2 x Spring Clip Retainers Setting 0.25 bar Weight 0.5 19mm ID 21mm...
€26.94 ex VAT
(€33.14 inc VAT)

SECOH JDK-S-40 SINGLE SERIES BLOWER
New Corner Triangle
SECOH JDK-S-40 SINGLE SERIES BLOWER
SECOH JDK-S-40 SINGLE SERIES BLOWER The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series. This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit. Long life expectancy All parts of the motor are combined into one single construction. The...
€116.23 ex VAT
(€142.96 inc VAT)
BLOWER HOUSING CATCH/CLIPBLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP If you need a full set of clips, order x4 clips. These clips match the blower housing on the below link : - Kingspan Parts Blower Housing (Complete)
€11.20 ex VAT
(€13.78 inc VAT)

PPFDS Stud Coupling (6mm)PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm) To allow connection of the PPFDS pipework into the Control Panel
€18.69 ex VAT
(€22.99 inc VAT)
no image available
€207.91 ex VAT
(€255.73 inc VAT)

TruckMaster Shackle
TruckMaster Shackle
TruckMaster Shackle For use with the TruckMaster 430 and the TruckMaster 900 4 x shackles are needed - please order 4 no. for a complete set.
€18.15 ex VAT
(€22.32 inc VAT)
4" POLYAIR REPLACEMENT CARBON PELLETS
4" POLYAIR REPLACEMENT CARBON PELLETS
POLYAIR REPLACEMENT CARBON PELLETS To prevent an odour problem or remove the odour install a activated carbon vent filter. If the odour is returning, the carbon will need to be replaced. The activated carbon vent filter is designed to fit your existing sewer vent pipe. The standard unit will fit the most common 4" / 110mm sewer vent pipe. Also comes in a 6" / 150mm option. To buy...
€47.80 ex VAT
(€58.79 inc VAT)

3/4' X 1' ANGLE TUNDISH FUNNEL
3/4' X 1' ANGLE TUNDISH FUNNEL
3/4" X 1" ANGLE TUNDISH FUNNEL Tundish valve for rainwater direct systems
€31.35 ex VAT
(€38.56 inc VAT)
DIVATRONIX / GRUNDFOS MESH FILTER & MANIFOLDDIVATRONIX / GRUNDFOS MESH FILTER & MANIFOLD
DIVATRONIX / GRUNDFOS MESH FILTER & MANIFOLD
DIVATRONIX MESH FILTER & MANIFOLD This filter is used to help reduce/eliminate any forgien objects entering the grey water system. PVC Pipe threaded with: 1 1/4" ID 1 1/2" OD
€85.84 ex VAT
(€105.58 inc VAT)

Envireau Leaf FilterEnvireau Leaf Filter
Envireau Leaf Filter
Envireau Leaf Filter (Neck-of-tank-Black-box) This leaf filter can be fitted to any standard rainwater inlet Material: Polypropolane Colour: Black Contains a mesh grill to stop particals entering the water Dims: 440mm L x 340mm H x 160mm W Comes complete with removable lid
€89.74 ex VAT
(€110.38 inc VAT)
INLINE FILTER 3/4' FOR ENVIREAU
INLINE FILTER 3/4' FOR ENVIREAU
INLINE FILTER 3/4" FOR ENVIREAU Used for: Kingspan Water Envireau. This is a 150 micron filter which filters water before it reaches pressure transducer.
€45.89 ex VAT
(€56.44 inc VAT)

MULTIGO MESH FILTER AND MANIFOLDMULTIGO MESH FILTER AND MANIFOLD
MULTIGO MESH FILTER AND MANIFOLD
MULTIGO MESH FILTER AND MANIFOLD This filter is used to help reduce/eliminate any forgien objects entering the grey water system. PVC Pipe threaded with: 1" ID 1 1/4" OD
€140.73 ex VAT
(€173.10 inc VAT)
RAINWATER PUMP MESH FILTER
RAINWATER PUMP MESH FILTER
RAINWATER PUMP MESH FILTER 200 micron steel mesh filter to fit Divatronix Manifold (part code: 0019288), to fit Ebara Multigo Pump ( Product Code: 0012115)
€68.00 ex VAT
(€83.64 inc VAT)

10' INLINE FITER CARTRIDGE, 5 MICRON
10' INLINE FITER CARTRIDGE, 5 MICRON
5 Poly Micron 10" White Cartridge Filter 5 Poly Micron 10 inch white cartridge filter for Rain Water UV system unit's.
€95.41 ex VAT
(€117.35 inc VAT)
1 1/2' Inline Filter
1 1/2' Inline Filter
1 1/2" Inline Filter 1 1/2 inch Inline filter for larger Rainwater units
€141.69 ex VAT
(€174.28 inc VAT)

3 PHASE TWIN CONTROL PANEL3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel. This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
€1,316.80 ex VAT
(€1,619.66 inc VAT)
EBARA IDROGO AUTO PUMP
EBARA IDROGO AUTO PUMP
EBARA IDROGO AUTO PUMP The IDROGO M 40/08 is a 5" submersible centrifugal multistage pump made of stainless steel AISI 304. APPLICATIONS Moving clear water from wells & cisterns. Pressure boosting domestic plants Small-sale irrigation Rainwater Harvesting Washing vehicles General pressure increases TECHNICAL DETAILS Equipped with twin mechanical seal...
€860.32 ex VAT
(€1,058.19 inc VAT)

EBARA MULTIGO PUMP M40/08
EBARA MULTIGO PUMP M40/08
EBARA MULTIGO PUMP M40/08 This is a Multigo 40/08 Vertical multistage centrifugal electric pump (AISI 304) APPLICATIONS • Flooded areas • Boosting of hydraulic plants • Fountains • Rainwater Harvesting • Allotments & Gardens TECHNICAL DETAILS • Quiet & Reliable • Moving water cools the motor • Durability ensured by interposed...
€1,107.74 ex VAT
(€1,362.52 inc VAT)
ET-60 CHARLES AUSTEN BLOWER
ET-60 CHARLES AUSTEN BLOWER
ET-60 CHARLES AUSTEN BLOWER The Charles Austen ET60 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use. Applications Include: Sewage aeration Aquatic oxygenation Spas / whirlpools Water features Product Features: Air flow rate - 60.0 l/min (0.12 bar) Max Pressure: 0.17 Bar Connector Size: 18mm Green...
from €92.72 ex VAT
(€114.05 inc VAT)

RAINWATER CABLE KIT - 20MRAINWATER CABLE KIT - 20M
RAINWATER CABLE KIT - 20M
SENSOR DEPTH PROBE 20M Used for: Kingspan Water Envireau. This is the 20 metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Rainwater Control & Display panels sold on this site :- Klargester Rainwater Supply Control Panel Klargester Rainwater Display Panel
€331.31 ex VAT
(€407.51 inc VAT)
RAINWATER DISPLAY PANEL
RAINWATER DISPLAY PANEL
RAINWATER DISPLAY PANEL This Sensor display panel can be used with both Kingspan Water Envireau and Biotec models.
€160.64 ex VAT
(€197.59 inc VAT)

RAINWATER SONIC ASSEMBLY KIT
RAINWATER SONIC ASSEMBLY KIT
RAINWATER SONIC ASSEMBLY KIT This Sonic unit goes with Kingspan Water & Aquabank systems
€POA
RAINWATER SUPPLY CONTROL PANEL
RAINWATER SUPPLY CONTROL PANEL
RAINWATER SUPPLY CONTROL PANEL Typically located above the stop tap of the incoming harvested water main, the control panel monitors the level of water in the tank and controls the starting and stopping of the pump in the Klargester Envireau Rainwater Harvesting System.
€461.01 ex VAT
(€567.04 inc VAT)

SENSOR DEPTH PROBE 50M
SENSOR DEPTH PROBE 50M
SENSOR DEPTH PROBE 50M Used for: Kingspan Water Envireau. This is the 50 metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Sensor Display Panel and Sensor Control panels sold on this site. Can take up to 10 working days to deliver (made to order)
€488.33 ex VAT
(€600.65 inc VAT)
SOLENOID VALVE DIRECT & OVERFLOWSOLENOID VALVE DIRECT & OVERFLOW
SOLENOID VALVE DIRECT & OVERFLOW
SOLENOID VALVE DIRECT & OVERFLOW This is a Solenoid valve used for a Kingpspan Envireau rainwater harvesting system. Sirai 3/4" Solenoid Valve. Normally OPEN Energise to CLOSE, including MPM CONNECTOR. For Multi-user systems.
€258.15 ex VAT
(€317.52 inc VAT)

19'' Retrofit Green Screw Cap
19'' Retrofit Green Screw Cap
19'' RETROFIT GREEN SCREW CAP 19 inch retrofit lid includes sealant lid
€96.11 ex VAT
(€118.22 inc VAT)
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin)
8 Inch lid (c/w bar and pin) The 8” cap lid only fits very old (obsolete) Tyrrell tanks, it can be used for similar sized tank necks but some modifications may be required.
€35.42 ex VAT
(€43.57 inc VAT)

Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16' lid (approx. dimension) -??ATLAS bunded oil tanks only.
Replacement lockable 16" lid (approx. dimension) - ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point. Supplied complete with: Lockable Plastic Manhole Lid Retention Ring Weatherproof Gasket Fits Older Atlas and Titan Bunded Tanks.
€83.76 ex VAT
(€103.02 inc VAT)
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18' lid (approx. dimension) for DESO or ATLAS bunded oil tank only.
Replacement lockable 18" lid (approx. dimension) for DESO or ATLAS bunded oil tank only. New Style; operated by silver key - Will fit ALL NEW BUNDED Tanks Comes complete with hinge Please Note: These lids are not interchangeable between old & new tanks
€52.58 ex VAT
(€64.67 inc VAT)

Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank onlyReplacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only
Replacement 6" (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only Fits onto the tank inspection point/inlet. Fits all Atlas Single Skin and Bunded Tanks
€36.71 ex VAT
(€45.15 inc VAT)
FUELMASTER & TRUCKMASTER LOCKFUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK (Comes with 2 keys) Lock for all Titan FuelMaster and TruckMaster tanks.
€42.11 ex VAT
(€51.80 inc VAT)

LID LOCKING STUD
LID LOCKING STUD
LID LOCKING STUD Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
€11.67 ex VAT
(€14.35 inc VAT)
LOCKING LOOP & NUT
LOCKING LOOP & NUT
LOCKING LOOP & NUT This locking hoop and nut can be used for all tanks within the Titan range.

5

€16.40 ex VAT
(€20.17 inc VAT)

OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP This part was Green on most tanks when first produced - screws into place.
€16.75 ex VAT
(€20.60 inc VAT)
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16''??HINGED OIL TANK LID GREEN
TITAN 16'' HINGED OIL TANK LID GREEN Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid. Includes the gasket 000325. This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
€92.42 ex VAT
(€113.68 inc VAT)

Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16' (approx. dimension) oil tank lid for??TITAN oil tanks and some ATLAS tanks.
Replacement 16" (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks. Old style red arm hinged lid.
€92.42 ex VAT
(€113.68 inc VAT)
Titan 19 inch Oil Tank LidTitan 19 inch Oil Tank Lid
Titan 19 inch Oil Tank Lid
TITAN 19'' OIL TANK LID Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only. This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
€77.43 ex VAT
(€95.24 inc VAT)

TITAN 24''??OIL TANK LIDTITAN 24''??OIL TANK LID
TITAN 24''??OIL TANK LID
TITAN 24'' OIL TANK LID Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
€107.24 ex VAT
(€131.91 inc VAT)
TITAN 4'' OIL TANK LIDTITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID
TITAN 4'' OIL TANK LID Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style). Please Note: Only the lower rubber seal is included in this product.

5

€37.94 ex VAT
(€46.67 inc VAT)

Titan Oil Tank 2 inch Vent Cap
Titan Oil Tank 2 inch Vent Cap
TITAN OIL TANK 2'' VENT CAP Replacement 2'' vent cap for TITAN oil tanks only.
€19.38 ex VAT
(€23.84 inc VAT)
TITAN OIL TANK 6'' INSPECTION CAPTITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP Replacement cap for TITAN oil tanks only. Fits onto the tank inspection point/inlet (new style).
€37.94 ex VAT
(€46.67 inc VAT)

1/2' HOSE CLEAR BRAIDED  per metre
1/2' HOSE CLEAR BRAIDED per metre
1/2' Clear Braided Hose SOLD PER METRE BioTec P4 to P25 and Airflow 1 to 4. This is a 1/2 inch clear reinforced hose which can also be used to connect the airlift to the manifold within BioTec P40 and Airflow AF5 upwards. Sold as a continual length Non-returnable once ordered and cut
€12.84 ex VAT
(€15.79 inc VAT)
1120mm BA/BB BIODISC BELT (post 2006)
1120mm BA/BB BIODISC BELT (post 2006)
1120mm BA/BB BIODISC BELT (post 2006) Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured post 2006.
€40.63 ex VAT
(€49.97 inc VAT)

160mm RUBBER GROMMET
160mm RUBBER GROMMET
160MM RUBBER GROMMET
€16.67 ex VAT
(€20.50 inc VAT)
1600mm BA/BB BIODISC BELT (pre 2006)
1600mm BA/BB BIODISC BELT (pre 2006)
1600mm BA/BB BIODISC BELT (pre 2006) Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured pre 2006
€40.63 ex VAT
(€49.97 inc VAT)
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 |