• display as grid Grid
  • display as list List
Page: 1 | 2 | 3 | 4 | 5 | 6 |

110MM BLANKING CAP
110MM BLANKING CAP
110MM BLANKING CAP PVC Plastic Closing Cap To suit standard sewage piping
€25.78 ex VAT
(€31.71 inc VAT)
BIOFICIENT FILTER MEDIABIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media. The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
from €136.24 ex VAT
(€167.58 inc VAT)

Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon Perfect for helping detect if a blower in a sewage system is failing. Can be bought to run along side the charles austen low pressure alarm
€59.96 ex VAT
(€73.75 inc VAT)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120) This Secoh JDK Connector is for all models from 60 - 120. It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
€35.87 ex VAT
(€44.12 inc VAT)

JDK-PRESSURE RELIEF VALVE (150-500)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-Pressure Relief Valve (150-500) This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged. Original Black Rubber 90 Degree Hose 2 x Spring Clip Retainers Setting 0.25 bar Weight 0.5 19mm ID 21mm...
€26.94 ex VAT
(€33.14 inc VAT)
SECOH JDK-S-40 SINGLE SERIES BLOWER
New Corner Triangle
SECOH JDK-S-40 SINGLE SERIES BLOWER
SECOH JDK-S-40 SINGLE SERIES BLOWER The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series. This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit. Long life expectancy All parts of the motor are combined into one single construction. The...
€116.23 ex VAT
(€142.96 inc VAT)

3 PHASE TWIN CONTROL PANEL3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel. This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
€1,316.80 ex VAT
(€1,619.66 inc VAT)
BLOWER HOUSING CATCH/CLIPBLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP If you need a full set of clips, order x4 clips. These clips match the blower housing on the below link : - Kingspan Parts Blower Housing (Complete)
€11.20 ex VAT
(€13.78 inc VAT)

PPFDS Stud Coupling (6mm)PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm)
PPFDS Stud Coupling (6mm) To allow connection of the PPFDS pipework into the Control Panel
€18.69 ex VAT
(€22.99 inc VAT)
BIOTEC P12 SCREEN ASSEMBLYBIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY 1no Airlift Baffle 2no Scum Baffles 8no Rivet Tapt
€POA

BIOTEC P6 SCREEN ASSEMBLYBIOTEC P6 SCREEN ASSEMBLY
BIOTEC P6 SCREEN ASSEMBLY
BIOTEC P6 SCREEN ASSEMBLY 1no Airlift Baffle 2no Scum Baffles 8no Rivet Tapt
€POA
FPZ R30-MD Side Channel Blower
Free Delivery
FPZ R30-MD Side Channel Blower
FPZ R30-MD Side Channel Blower The R30-MD FPZ Side Channel Blower is a single impellor “double stage” blower which supersedes the SCL-DH 30 model. A double stage impellor is mounted directly onto the motor shaft for contact-free compression. This blower has a robust aluminium construction. Product characteristics 1Phase Power Noise Level: 69.2-72.8 dB Energy efficient motors...
€3,084.16 ex VAT
(€3,793.52 inc VAT)

P006 BALE
P006 BALE
BALE ASSEMBLY P006 Filtration Media to Suit Biotec P006 Sewage Treatment Systems Comes complete with Enkamat Netting/Matting
P6-P12 BIOTEC OUTER COVER ONLYP6-P12 BIOTEC OUTER COVER ONLY
P6-P12 BIOTEC OUTER COVER ONLY
Klargester BioTec Sewage Treatment Plant Outer Cover P6 Made from Glass Reinforced Plastc Coverd in a green powder coated protective layer Access cover sold separately
€POA

PUMPWELL (1 METRE) PIPEWORK
PUMPWELL (1 METRE) PIPEWORK
Pumpwell (1 metre) pipework Boitec P6-P12 IPS Manifold pipework Includes Non-return Valve Material: PVC Manufatured in one complete part
€190.03 ex VAT
(€233.74 inc VAT)
PUMPWELL (1.5 METRE) PIPEWORK
PUMPWELL (1.5 METRE) PIPEWORK
Pumpwell (1.5 metre) pipework Boitec P6-P12 IPS Manifold pipework Includes Non-return Valve Material: PVC Manufatured in one complete part
€196.22 ex VAT
(€241.35 inc VAT)

PUMPWELL ASSEMBLYPUMPWELL ASSEMBLY
PUMPWELL ASSEMBLY
Pumpwell Assembly 1no IPS Pumpwell 2no Scrum Baffle To be used to convert your gravity system into an IPS unit (Pumped Outlet)
€187.67 ex VAT
(€230.83 inc VAT)
ACCESS COVER KEY
ACCESS COVER KEY
Access Cover key Access cover key for all Klargester Domestic Sewage Treatment Plants Made from a zinc alloy Chrome plated 8mm triangle One supplied 80mm long
€16.46 ex VAT
(€20.25 inc VAT)

AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER Air Filter to suit ET-60 and ET-80 Charles Austen Blower
€15.74 ex VAT
(€19.36 inc VAT)
BIODISC / BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
BIODISC / BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
BIODISC/ BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK Suitable to fit all BioTec unit lids and P006-P012 BioTec and also suit the BA BioDisc systems. Please note 2 cover locks are required to secure the lids.
€16.61 ex VAT
(€20.43 inc VAT)

Blower Box Cover
Blower Box Cover
BIOTEC BLOWER COVER BOX
€36.52 ex VAT
(€44.92 inc VAT)
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12 Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only Made from High grade Glass Reinforced Plastic (GRP) Green Powdercoated protective layer Complete with Locks Seal not required If a stong effluient smell is coming from the tank, the tank needs inspected
€POA

BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE The Klargester BioTec Distribution Cone is a blue plastic effluent distribution head which is placed on the end of the pipework to diffuse effluent by spraying directly over the media. Suitable for the Klargester BioTec 1, 2, 3 and 4 sewage treatment systems
€13.63 ex VAT
(€16.76 inc VAT)
ET-120 CHARLES AUSTEN BLOWERET-120 CHARLES AUSTEN BLOWER
ET-120 CHARLES AUSTEN BLOWER
ET-120 CHARLES AUSTEN BLOWER Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key...
from €154.95 ex VAT
(€190.59 inc VAT)

ET-150 CHARLES AUSTEN BLOWERET-150 CHARLES AUSTEN BLOWER
ET-150 CHARLES AUSTEN BLOWER
ET-150 CHARLES AUSTEN BLOWER Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key...
€267.55 ex VAT
(€329.09 inc VAT)
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS Chain & Link Set for BA or BB Biodisc 1/2 BS Chain & Link Set - Biodisc replacement chain - Can be used on Biodisc Sewage Treatment Systems. This chain can be measured from centre to centre of each link. Strong, Simple, Versitile, Reliable This chain comes as standard 5 foot in length
€93.41 ex VAT
(€114.89 inc VAT)

BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP Come complete with: 1no pump chamber 1no 300 x 200 x 9mm Polypropylene Sheet 1no BA-BB Biodisc IPS Manifold - Automatic Pump
€610.47 ex VAT
(€750.88 inc VAT)
BC BioDisc Bottom PulleyBC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems. 30mm wide 8mm pitch 65mm Plain Bored 80 Teeth Torerance H9 Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when changing the botttom pulley
€97.63 ex VAT
(€120.08 inc VAT)

BC Pulley Locking Element
BC Pulley Locking Element
BC Pulley Locking Element This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
€34.96 ex VAT
(€43.00 inc VAT)
BD/BE BEARING BUSH HALF x 2noBD/BE BEARING BUSH HALF x 2no
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820 Comes as a pair of 2no
€40.80 ex VAT
(€50.18 inc VAT)

BD/BE BEARING HOUSINGBD/BE BEARING HOUSING
BD/BE BEARING HOUSING
BD/BE BEARING HOUSING The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems. This listing is for one single half bearing (Each Biodisc contains 2)
€53.85 ex VAT
(€66.24 inc VAT)
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc The BD/BE Locking Element for Biodisc is suitable for all Klargester BD/BE BioDisc Sewage Treatment Systems. The locking element fits into the centre of the pulley and makes sure it is secured to the BioDisc shaft. RCK40-40x65 SHAFT CLAMPING ELEMENT
€36.89 ex VAT
(€45.37 inc VAT)

BD/BE TOP PULLEY FOR BIODISCBD/BE TOP PULLEY FOR BIODISC
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant 17 Teeth 5/8" Pitch F7 Tolerence 20mm Wide High Torque Drive Pulley Bored 20mm Grubscrew Supplied British Standard Keyway
€43.11 ex VAT
(€53.03 inc VAT)
BD/BE/BF DUPLEX DRIVE CHAIN - 102 PITCHES
BD/BE/BF DUPLEX DRIVE CHAIN - 102 PITCHES
BD/BE/BF Duplex Drive Chain - 102 pitches The BD/BF 5/8" duplex drive chain is suitable for all Klargester BD/BE/BF BioDiscs (2m length)
€119.11 ex VAT
(€146.51 inc VAT)

BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer) This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. Bauer 2000 Series helical geared motor Supply: 230V/50Hz/1PH Output power 0.120 kW Output torque 136 Nm Output speed 8.3 rpm Terminal box mounting B3 Terminal box position I/A Terminal...
€1,042.11 ex VAT
(€1,281.80 inc VAT)
BG BIODISC DUPLEX CHAIN - 2 METRES
BG BIODISC DUPLEX CHAIN - 2 METRES
BG BIODISC DUPLEX CHAIN - 2 METRES The BG 3/4" duplex drive chain is suitable for all Klargester BG BioDiscs (2m length)
€126.76 ex VAT
(€155.91 inc VAT)

BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER) This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units. Supply: 230V/50Hz/1PH Output power: 0.180 kW Output torque: 280 Nm Output speed: 6.1 rpm
€1,383.56 ex VAT
(€1,701.78 inc VAT)
BIODISC BA/BB RADIAL ARMBIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM This galvanised steel angle Radial Arm for BA-BB biodisc sewage treatment plant, this part hold the discs in place and stops them from turning individually.
€35.03 ex VAT
(€43.09 inc VAT)

CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX 10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. ( Product Ref: 0012363 )
€100.48 ex VAT
(€123.59 inc VAT)
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR 8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox. This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
€84.31 ex VAT
(€103.70 inc VAT)

Duplex Chain Link (To Suit BD/BE/BF)
Duplex Chain Link (To Suit BD/BE/BF)
DUPLEX CHAIN LINK To Suit BD/BE/BF DUPLEX DRIVE CHAIN (Remember to use good qualitiy grease to lubricate the chain when required.)
€23.43 ex VAT
(€28.82 inc VAT)
Latch Block - Old RBC Lids
Latch Block - Old RBC Lids
Latch Block - Old RBC Lids latch block complete with bolt for old style klargester RBC unit's This latch hold the lid in place, comes with bolt and washer Material: Hardened Teflon plastic
€26.13 ex VAT
(€32.14 inc VAT)

STEPHAN TO PANASONIC CONVERSION KIT
STEPHAN TO PANASONIC CONVERSION KIT
Stephan to Panasonic Conversion Kit This is a conversion kit to suit a peripheral drive. Includes: 1no Roller Kit 1no Pinion Wheel 1no New Drive Plate 4no Bolts 8no Washers 4no Nuts 1no Panasonic Motor Gearbox 1no galvanised steel mount 4no Bolts 1no capasitor
€736.79 ex VAT
(€906.25 inc VAT)
24 VAC Impulse Relay
24 VAC Impulse Relay
24 VAC Impulse Relay These realys are used in Klargester Biodiscs, Biotecs and Bioficients, The contacts are actuated with every current pulse and they stay in the operating position they have adopted in each case until the next pulse occurs. It is possible to actuate the contacts manually by pressing a pushbutton provided on the unit. The contact position is shown by an indicator. The units can...
€97.63 ex VAT
(€120.08 inc VAT)

BC,BD,BE Helical Motor/Gearbox (Bauer)
BC,BD,BE Helical Motor/Gearbox (Bauer)
BC,BD,BE Helical Motor/Gearbox (Bauer) This is a Bauer BG10 Motor and Gearbox suitable for the Klargester BC, BD and BE Biodisc Sewage Treatment Systems. The motor and gearbox is pre-installed with a start/run capacitor and keyway steel. The motor & gearbox also includes an information booklet with wiring diagrams. Type:BG10Z-11/ECO4LA4/SP Phase:Single Voltage:240V Shaft Size:20mm Speed:-...
€534.97 ex VAT
(€658.01 inc VAT)
no image available
BIODISC BA/BB LID EXTENSION NECK 500mm
BA/BB BIODISC LID EXTENSION NECK 500mm Allows sewage treatment system to set at the correct level to achieve the recommended gradiant for the external pipework
€POA

BIODISC BA/BB NYLON WASHERS
BIODISC BA/BB NYLON WASHERS
BA/BB BIODISC NYLON WASHERS PRICE IS FOR SINGLE WASHER** BA / BB BioDisc Nylon spacer washers used for the shaft. We recommend to order x6 in total. A delivery charge of €9.20 + vat will be added to the order at the checkout.
€11.53 ex VAT
(€14.18 inc VAT)
BIODISC BB ROTOR PACKBIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK Klargester BB Rotor Pack is a replacement sewage treatment assembly to suit the BB range of Biodisc.
€POA
Page: 1 | 2 | 3 | 4 | 5 | 6 |

Wastewater Accessories FAQs

What is a distribution box on a septic tank?

A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.

Is distribution box necessary?

The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.

What is the difference between septic tank and distribution box?

The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.