• display as grid Grid
  • display as list List
Page: First | | 4 | 5 | 6 | 7 | 8 | 9 | 10 |

SENSOR DEPTH PROBE 50M
SENSOR DEPTH PROBE 50M
SENSOR DEPTH PROBE 50M Used for: Kingspan Water Envireau. This is the 50 metre depth probe for a Kingspan Water Rainwater Harvesting System. This probe only works with the Sensor Display Panel and Sensor Control panels sold on this site. Can take up to 10 working days to deliver (made to order)
€488.33 ex VAT
(€600.65 inc VAT)
Calpeda GQS 40-9 Submersible Drainage Pump (2" Vertical Port)
from €404.67 ex VAT
(€497.74 inc VAT)

AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER Air Filter to suit ET-60 and ET-80 Charles Austen Blower
€15.74 ex VAT
(€19.36 inc VAT)
COALESCER FOAM FILTER - NSFP003-006COALESCER FOAM FILTER - NSFP003-006
COALESCER FOAM FILTER - NSFP003-006
COALESCER FOAM FILTER - NSFP003-006 Klargester Full Retention Separator Foam Filters - nsfp003 and nsfp006 - FOAM Ø250 X 350 X 100 30/20PPI Clean regularly and replace when required this will help with efficiency of the tank To identify the type of filter you need, information should be on the inside of the neck of the chamber
€107.52 ex VAT
(€132.25 inc VAT)

PUMPWELL (1 METRE) PIPEWORK
PUMPWELL (1 METRE) PIPEWORK
Pumpwell (1 metre) pipework Boitec P6-P12 IPS Manifold pipework Includes Non-return Valve Material: PVC Manufatured in one complete part
€190.03 ex VAT
(€233.74 inc VAT)
PROXIMITY / REED SWITCHPROXIMITY / REED SWITCH
PROXIMITY / REED SWITCH
Proximity Switch (ONLY) This proximity switch can be used on the Kingspan Klargester Biodisc Units. The switch is located beside the motor gearbox in the tank. Used in conjunction with the Loss of Rotation magnet.. This magnet is located on the rotor and with each revolution both the magnet and switch will contact. Once this cycle is broken the alarm will sound thus signalling the loss of rotation. If...
€42.53 ex VAT
(€52.31 inc VAT)

BIODISC PERIPHERAL DRIVE ROLLER KIT
BIODISC PERIPHERAL DRIVE ROLLER KIT
BIODISC PERIPHERAL DRIVE ROLLER KIT This complete set of 12 peripheral drive rollers including nuts, bolts and washers, can be used in conjunction with the Klargester biodisc FA, FB and FC Sewage Treatment Systems.
€32.58 ex VAT
(€40.07 inc VAT)
Secoh EL-60 - 150 Filter
Secoh EL-60 - 150 Filter
Secoh EL-60 - 150 Filter Filter used in the Secoh EL 60 - 150 blower units. Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
€17.94 ex VAT
(€22.07 inc VAT)

KS4 SOLAR CONTROLLER
KS4 SOLAR CONTROLLER
Discontinued, KS Plus Solar Controller is an alternative
€POA
Calpeda GXR 12-18 Stainless Steel Submersible Drainage PumpCalpeda GXR 12-18 Stainless Steel Submersible Drainage Pump
Calpeda GXR 12-18 Stainless Steel Submersible Drainage Pump
Calpeda GXR 12-18 Stainless Steel Submersible Drainage Pump with 10m Cable (240 v) Construction GXR Open single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber. Minimum dimension and high levels of performance, for use in many...
€1,099.87 ex VAT
(€1,352.84 inc VAT)

LOCKING LOOP & NUT
LOCKING LOOP & NUT
LOCKING LOOP & NUT This locking hoop and nut can be used for all tanks within the Titan range.

5

€16.40 ex VAT
(€20.17 inc VAT)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-Pressure Relief Valve (150-500) This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged. Original Black Rubber 90 Degree Hose 2 x Spring Clip Retainers Setting 0.25 bar Weight 0.5 19mm ID 21mm...
€26.94 ex VAT
(€33.14 inc VAT)

BIODISC BA/BB PULLEY LOCKING ELEMENT
BIODISC BA/BB PULLEY LOCKING ELEMENT
BIODISC BA/BB PULLEY LOCKING ELEMENT BA/BB Pulley locking element
€28.67 ex VAT
(€35.26 inc VAT)
BD/BE TOP PULLEY FOR BIODISCBD/BE TOP PULLEY FOR BIODISC
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant 17 Teeth 5/8" Pitch F7 Tolerence 20mm Wide High Torque Drive Pulley Bored 20mm Grubscrew Supplied British Standard Keyway
€43.11 ex VAT
(€53.03 inc VAT)

P006 BALE
P006 BALE
BALE ASSEMBLY P006 Filtration Media to Suit Biotec P006 Sewage Treatment Systems Comes complete with Enkamat Netting/Matting
3.15 AMP FUSE FOR GREEN PANEL
3.15 AMP FUSE FOR GREEN PANEL
3.15 AMP FUSE FOR GREEN PANEL 3.15amp Motor-Blower fuse for the Small Green Control Panel.
€12.16 ex VAT
(€14.96 inc VAT)

230V RED FLASHING XENON BEACON
230V RED FLASHING XENON BEACON
230V RED FLASHING XENON BEACON 1 phase red Flashing beacon Ideal for alarm control panels typical in pump control industry Height: 44mm - Width: 76mm
€117.61 ex VAT
(€144.66 inc VAT)
BF/BG LOCKING ELEMENTBF/BG LOCKING ELEMENT
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
€42.80 ex VAT
(€52.64 inc VAT)

JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120) This Secoh JDK Connector is for all models from 60 - 120. It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
€35.87 ex VAT
(€44.12 inc VAT)
BLOWER HOUSING CATCH/CLIPBLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP If you need a full set of clips, order x4 clips. These clips match the blower housing on the below link : - Kingspan Parts Blower Housing (Complete)
€11.20 ex VAT
(€13.78 inc VAT)

BATTERY PACK FOR GREEN CONTROL PANELBATTERY PACK FOR GREEN CONTROL PANEL
BATTERY PACK FOR GREEN CONTROL PANEL
BATTERY PACK FOR GREEN CONTROL PANEL Replacement battery pack for Green Control Panel.
€32.58 ex VAT
(€40.07 inc VAT)
COALESCER FOAM FILTER - SEALING-NS80-200 UNITSCOALESCER FOAM FILTER - SEALING-NS80-200 UNITS
COALESCER FOAM FILTER - SEALING-NS80-200 UNITS
COALESCER FOAM FILTER - SEALING-NS80-200 UNITS Klargester Full Retention Separator Foam Filters - sealing foam to suit ns80-200 unit Clean regularly and replace when required this will help with efficiency of the tank To identify the type of filter you need, information should be on the inside of the neck of the chamber
€40.68 ex VAT
(€50.04 inc VAT)

Calpeda MXP 202 Water Pump Max 21.5m Head 75L/MinCalpeda MXP 202 Water Pump Max 21.5m Head 75L/Min
Calpeda MXP 202 Water Pump Max 21.5m Head 75L/Min
Calpeda MXP 202 Water Pump Max 21.5m Head 75L/Min These clean water horizontal multi-stage centrifugal pumps with plastic impellers are suitable for water supply. This range of water pumps are universal pump, for domestic use, for civil and industrial applications, for garden use and irrigation. This water pump has a maximum head heigh of 21.5m with a maximum flow rate of 75 l/min. Applications For...
€346.73 ex VAT
(€426.48 inc VAT)
Duplex Chain Link (To Suit BD/BE/BF)
Duplex Chain Link (To Suit BD/BE/BF)
DUPLEX CHAIN LINK To Suit BD/BE/BF DUPLEX DRIVE CHAIN (Remember to use good qualitiy grease to lubricate the chain when required.)
€23.43 ex VAT
(€28.82 inc VAT)

P006 AirliftP006 Airlift
P006 Airlift
P006 Airlift This Airlift is used on our P006 Sewage treatment system. It helps to distribute waste water from the settling tank up through the pipework and is then filtered throuhg the bale filtration. Comes complete with Distrabustion cone and Connections Dims: 1700mm H Material: Acrylonitrile Butadiene Styrene (ABS Plastic)
€70.94 ex VAT
(€87.26 inc VAT)
BD/BE BEARING HOUSINGBD/BE BEARING HOUSING
BD/BE BEARING HOUSING
BD/BE BEARING HOUSING The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems. This listing is for one single half bearing (Each Biodisc contains 2)
€53.85 ex VAT
(€66.24 inc VAT)

CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR 8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox. This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
€84.31 ex VAT
(€103.70 inc VAT)
BIOSAFE KEYBIOSAFE KEY
BIOSAFE KEY
BIOSAFE KEY Keys used for Biosafe Tanks
€19.36 ex VAT
(€23.81 inc VAT)

BC Pulley Locking Element
BC Pulley Locking Element
BC Pulley Locking Element This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
€34.96 ex VAT
(€43.00 inc VAT)
Calpeda MXP 205A Water Pump Max 56m Head 90L/MinCalpeda MXP 205A Water Pump Max 56m Head 90L/Min
Calpeda MXP 205A Water Pump Max 56m Head 90L/Min
Calpeda MXP 205A Water Pump Max 56m Head 90L/Min These clean water horizontal multi-stage centrifugal pumps with plastic impellers are suitable for water supply. This range of water pumps are universal pump, for domestic use, for civil and industrial applications, for garden use and irrigation. This water pump has a maximum head heigh of 56m with a maximum flow rate of 90 l/min. Applications For...
from €459.67 ex VAT
(€565.39 inc VAT)

12V XENON AMBER BEACON
12V XENON AMBER BEACON
12V XENON AMBER BEACON 12V Xenon Beacon for control panels
€186.83 ex VAT
(€229.80 inc VAT)
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION Magnet for Loss of Rotaion Alarm on a BioDisc. If you need the full kit see below :- Kingspan Parts Loss of Rotation Kit
€22.86 ex VAT
(€28.12 inc VAT)

P018-P025 ACCESS COVER LOCKP018-P025 ACCESS COVER LOCK
P018-P025 ACCESS COVER LOCK
P018-P025 Access Cover Lock Biotec P18-25 Access cover lock - long barrel type, complete with nut. Note, that the older version of these are now obsolete. The thread length on the new version is 12mm and slight adjucstments might need made if its an older unit
€18.87 ex VAT
(€23.21 inc VAT)
BA Rotor Assembly Complete
BA Rotor Assembly Complete
BA Rotor Assembly Complete Full rotor pack for 1 x BA Biodisc This product is made to order, lead time 2 to 3 weeks.
€POA

BIODISC NYLON BEARING
BIODISC NYLON BEARING
BIODISC NYLON BEARING Bearing to suit Klargester BioDisc FA, FB and FC Sewage Treatment Systems. This bearing has a 25mm internal diameter and a closed off side (as pictured). For a full set you will need x2,
€83.11 ex VAT
(€102.23 inc VAT)
PUMPWELL (1.5 METRE) PIPEWORK
PUMPWELL (1.5 METRE) PIPEWORK
Pumpwell (1.5 metre) pipework Boitec P6-P12 IPS Manifold pipework Includes Non-return Valve Material: PVC Manufatured in one complete part
€196.22 ex VAT
(€241.35 inc VAT)

MANN FILTER
MANN FILTER
C1337 Mann Filter C1337 Filter, for filtering destructive particles such as dust, pollen, sand, soot and even drops of water out of the intake air. Height: 125mm OD/Width Max: 128mm OD/Width Min: 128mm ID/Depth Max: 64mm ID/Depth Min: 64mm
€59.28 ex VAT
(€72.91 inc VAT)
Calpeda GQR 10-18 Submersible Drainage Pump (1 1/2" Vertical Port)
Calpeda GQR 10-18 Submersible Drainage Pump (1 1/2" Vertical Port)
Calpeda GQR 10-18 Submersible Drainage Pump The Calpeda GQR submersible drainage pump is a sinlge-impeller submersible drainage pump with a vertical delivery port with an open impeller. It has a double mechanical shaft seal with interposed oil chamber to protect against dry-running. This drainage pump has a maximum head height of 18m with a maximum pumping rate of 450 l/min. Applications For...
€699.47 ex VAT
(€860.35 inc VAT)

BIODISC BA/BB RADIAL ARMBIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM This galvanised steel angle Radial Arm for BA-BB biodisc sewage treatment plant, this part hold the discs in place and stops them from turning individually.
€35.03 ex VAT
(€43.09 inc VAT)
Green panel beacon and adaptor
Green panel beacon and adaptor
Green panel beacon and adaptor This adapter allows customers to use the oldstyle green control panel but with the new 6 volt beacon.
€121.00 ex VAT
(€148.83 inc VAT)

BF/BG Non Drive End BearingBF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants. Price includes seals, housing, locking ring and bearing. See images 3 & 4 for technical data on the bearing.
€360.42 ex VAT
(€443.32 inc VAT)
BIODISC BA/BB BEARING RETAINING PLATE
BIODISC BA/BB BEARING RETAINING PLATE
BIODISC BA/BB BEARING RETAINING PLATE Half nylon bearing retaining plate for non-drive end on Klargester BioDisc BA/BB/BAX units.
€26.61 ex VAT
(€32.73 inc VAT)

P18 - P25 COVER & ACCESS COVERP18 - P25 COVER & ACCESS COVER
P18 - P25 COVER & ACCESS COVER
P18 - P25 COVER & ACCESS COVER Biotec P18-P25 Complete cover, including the inner Surfboard style lid, Locks & Keys and Anti-Slip Mats Made from High grade Glass Reinforced Plastic (GRP) Green Powder coated protective layer Seal not required If a strong effluent smell is coming from the tank, the tank needs to be inspected
€POA
COALESCER FOAM FILTER 315X80X600COALESCER FOAM FILTER 315X80X600
COALESCER FOAM FILTER 315X80X600
COALESCER FOAM FILTER 315X80X600 Klargester Full Retention Separator Foam Filters - 315x80x600 Clean regularly and replace when required this will help with efficiency of the tank To identify the type of filter you need, information should be on the inside of the neck of the chamber
€175.87 ex VAT
(€216.32 inc VAT)

Delta Clearwater Sewage treatment Lid/Cover (900mm)Delta Clearwater Sewage treatment Lid/Cover (900mm)
Delta Clearwater Sewage treatment Lid/Cover (900mm)
*2 Week Lead Time From Point of Order*
€POA
COALESCER FOAM FILTER - NS010-018COALESCER FOAM FILTER - NS010-018
COALESCER FOAM FILTER - NS010-018
COALESCER FOAM FILTER - NS010-018 Klargester Full Retention Separator Foam Filters - ns010-018 Clean regularly and replace when required this will help with efficiency of the tank To identify the type of filter you need, information should be on the inside of the neck of the chamber
€158.46 ex VAT
(€194.91 inc VAT)

BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit Klargester BC BioDisc Bearing kit for the drive end. The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
€75.29 ex VAT
(€92.61 inc VAT)
AIR LINE REGULATING VALVE 1/2'
AIR LINE REGULATING VALVE 1/2'
AIRLINE REGULATING VALVE 1/2" 1/2 inch airline valve for P6 to P12 unit's
€15.96 ex VAT
(€19.63 inc VAT)
Page: First | | 4 | 5 | 6 | 7 | 8 | 9 | 10 |