4 ' ACTIVATED CARBON VENT FILTER

4 ' ACTIVATED CARBON VENT FILTER
Quality filtration unit protecting tank contents and downstream equipment from sediment and contamination.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Kingspan Parts
What makes this FILTER the right choice?
4" ACTIVATED CARBON VENT FILTER
This activated carbon vent filter can remove offensive odours such as hydrogen sulphide as they exit the sewer pipe network through vent pipes. This filter will eliminate these unpleasant odours.
Odours from the sewer pipe network and septic tanks are frequent but often a random nuisance problem in home, work or elsewhere. All sewer pipe networks and septic tanks should have vent pipes installed. These vent pipes allow the pressure to equalise as wastewater flows into the network from a sink, toilet or other sources. Without vent pipes, flow into the sewer network would be compromised and therefore it would not function correctly. Under normal conditions the vented air from the sewer pipe network is direct to the outside of the building and disperses into the outside air unnoticed. However, random event can occur where the wind outside redirects the odour from the vent pipe back towards an occupied area of the building.
To prevent an odour problem or remove the odour install a activeated carbon vent filter.
The activated carbon vent filter is designed to fit your existing sewer vent pipe. The standard unit will fit the most common 4" / 110mm sewer vent pipe. Also comes in a 6" / 150mm option.
• Easy to install
• Cost effective
• Fits standard vent pipe sizes
• No more offensive odours
• No more spoiled patio parties
• No more foul air drifting in through open windows
• Easy to replace the activated carbon
Technical data
Full specifications
| Reference | |
| SKU | 1056367 |
| EDEL code | DELIVERY |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Technical documentation
Downloads & data sheets
Product video
See the FILTER in action
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.