70L Easy-Clean Domestic Grease Trap

70L Easy-Clean Domestic Grease Trap

Fats, oils and grease (FOG's) entering into the main sewer system will , over time cause blockages, foul odours and pest infestation.The purpose of a grease trap is to collect and therefore reduce the amount of fats, oils and greases (FOG's) that enter the main sewers. The key to an effective wastwater treatment system is to remove the FOG's before they progress to the sewage system by removing the FOG's as they are cooling and allowing the cleaned water to proceed to the sewage system. The Easy-Clean Domestic Grease Trap from Polylok is the solution to removing the FOG's, reducing blockages, improving the performance of the wastewater treatment system and minimising pollution of groundwater and open waterways.

Features and Benefits:-

• 70 litre capacity
• Supplied with sealed access cover to contain odours
• 500mm diameter clear opening for easy access for cleaning and maintenance
• Removable solids collection sump with handle 
• Removable inlet and outlet baffles
• Durable materials for long life 
• Can be used for domestic use
• Complete 'Connect & Go' unit - everything included

• Product Code: POL
• Lid size: 500mm
• Outlet Size: 110mm
• Shape: Underground
• Shipping: Free Delivery

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

ORDER CANCELLATION 

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie 


After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS 

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss. 

Polylok Grease Trap Brochure

Polylok Grease Trap Installation Guide

Polylok Grease Trap Maintenance Guide