Product Description
AEROCYL 210L HEAT PUMP HOT WATER CYLINDER WITH 50L INTEGRAL BUFFER TANK
Kingspan Albion Aerocyl Heat Pump hot water cylinders have been specifically designed for use in conjunction with a heat pump as the main source of energy. Featuring a purpose-designed coil, which allows maximum heat transfer of renewable energy into the stored water, the cylinders are suitable for use with a wide range of heat pumps available in the Ireland. This hot water cylinder now comes with an integral 50L Buffer tank.
Aerocyl Heat Pump hot water cylinders will provide you with both Domestic Hot Water and space heating (through traditional radiators or underfloor heating).
Where the input from a heat pump is not sufficient to heat the water to desired temperature, an electric immersion heater can be used to top it up.
Manufactured from Duplex stainless steel for excellent corrosion resistance, Aerocyl hot water cylinders feature energy efficient and environmentally friendly foam insulation for low standing heat loss and are encased in a tough, stove enamelled casing with white glossy finish, which can be wiped clean.
Features and Benefits:
- Space saving solution with half the footprint of a standard installation
- 210L capacity cylinder with 50L buffer tank
- 28mm coil heat exchanger for maximum heat transfer rated up to 32kW - Subject to delivering the required heat load to the coil through required flow rates and pipe sizing.
- Mains pressure hot water - (regulated up to 3 bar) for powerful showers
- High flow rates - ideal for multiple bathrooms, baths fill very quickly
- Fast reheat - high efficiency, hot water always available
- Very well insulated (50mm-thick environmentally friendly CFC and HCFC-free polyurethane foam lagging ) - low heat loss, economical to run
- Low maintenance - no hidden costs, no anode required
- Guaranteed# for 10 years on Duplex inner vessel against manufacturing defects and 2 years on parts
- Comes with unvented kit - includes acetal tundish, inlet control set, temperature & pressure relief valve, two port valve, immersion heater, expansion vessel and dual thermostat.
- Optional Buffer Kit containing circulator pump & cable, 28mm two port valve and 3kW immersion heater & O-ring.
- Optional Heat Pump Kit with flow regulator with sight glass and magnetic filter with 28mm isolation valves
Connections:
- 22mm Inlet control set cold feed
- 22m Hot water draw-off
- 3kW Immersion heater
- 3kW Immersion heater supplied separately as part of a kit
- Tee to potable expansion vessel
- Temperature & pressure relief valve
- 22mm Secondary return
- 10mm Dry stat pocket
- Circulating pump supplied separately as part of a kit
- 28mm Two port valve to heating system supplied separately as part of a kit
- 28mm Three port diverter valve
- Flow regulator supplied separately as part of a kit
- 28mm Flow - HP
- 28mm Return - HP
- Filling loop
- Balancing bypass valve
- Anti splash tundish
- Air release valve
- Return from heating system (behind pump)
Not suitable for well water.
If you would like more information on choosing the correct hot water cylinder for your needs please click the following link - Choosing The Correct Hot Water Cylinder
Product Specification
- Product Code: KING
- Shipping: Free Delivery
- Volume: 210ltr
- Dimensions: H:1899mm
- Diameter: 550mm
Delivery Terms
tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.
Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier.
Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.
Klargester Tanks - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.
Harlequin Tanks - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.
Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request.
Returns Information
ORDER CANCELLATION
In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.
Please call 051 351325 or e-mail sales@tanks.ie
After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.
Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.
DEFECTIVE PRODUCTS
If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325.
If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee.
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.
Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss.
Video
Downloadable Documents
View Related Categories
You may also like...
from €2,122.34 ex VAT
(€2,610.48 inc VAT)