BC BIODISC BELT, PRE 2006 MODELS ONLY
BC Biodisc Belt, Pre 2006 Models Only (1800mm)
no Teeth 8mm Pitch 20mm Wide Standard Duty HTD Belt The motor on these Biodisc Units high up in the tank and offside from the rotor.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Kingspan Parts
What makes this (1800mm) the right choice?
BC Biodisc Belt (1800mm)
Replacement heavy-duty drive belt to suit Klargester BC BioDiscs manufactured pre-2006.
140no Teeth
8mm Pitch
20mm Wide Standard Duty HTD Belt
The motor on these Biodisc Units high up in the tank and offside from the rotor.
Technical data
Full specifications
| Reference | |
| SKU | 0013705 |
| EDEL code | DELIVERY |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.
