BLOWER HOUSING (COMPLETE)
BLOWER HOUSING (COMPLETE)
Suitable for P006 - P025 BioTec units.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Kingspan Parts
What makes this (COMPLETE) the right choice?
Plastic Blower Housing - Complete Unit.
Suitable for P006 - P025 BioTec units.
Contains : -
1no x 0701007 - Blower Housing Lid
1no x 0701008 - Blower Housing Base
4no x 0701009 - Blower Housing Clips.
Please note that if you have the old style of blower housing which needs screwed down, you will need to replace it with the new housing unit.
Technical data
Full specifications
| Reference | |
| SKU | 1009112 |
| EDEL code | DELIVERY |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.
