Calpeda GXR 13 Submersible Manual Pump with 10m Cable

Product Ref: GXRM 13

Grey Water, Water Grey Water, Water 2 Year Free Delivery

Choose option:

updown
from €406.87 ex VAT
(€500.45 inc VAT)

Product Description

Calpeda GXR 13 Submersible Manual Pump with 10m Cable 

GXR: Single open impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port. Motor cooled by the pumped water passing between the motor jacket and the external jacket. Double shaft seal with oil chamber. Minimum dimension and high levels of performance, for use in many different applications, head up to 12.7 m and flow rates up to 220 Litres/min.

Applications

  • For clean water containing solids up to 10 mm grain size.
  • For draining rooms or or emptying tanks.
  • Extraction of water from ponds, streams or pits and for rainwater collection.
  • For irrigation purposes.
  • For outdoor use a power supply cable of not less than 10 m should be used in accordance with: EN 60 335-2-41.

Construction

  • Single-impeller submersible pumps in chrome-nickel stainless steel, with vertical delivery port and with open impeller.
  • Motor cooled by the pumped water passing between the motor jacket and the external jacket.
  • Double shaft seal with oil chamber.
  • Minimum dimension and high levels of performance, for use in many different applications, head up to 12,7 m and flow rates up to 220 Litres/min.

Features

  • G1 1/4" vertical, upward delivery port for installation in small pits
  • Easy adjustment of the float switch to allow adjustment of start/ stop pump levels
  • Minimum dimension and high levels of performance, for use in many different applications, head up to 12.7m and flow rates up to 220 liters/min
  • Suction strainer with a double row of holes, for extra safety against clogging
  • Handle in polypropylene
  • Easy inspection of the capacitor area
  • Shaft in chrome-nickel stainless steel
  • Motor cooled by the pumped water passing between the motor jacket and the external jacket
  • Ceramic stainless steel shaft sleeve
  • Oil chamber
  • Impeller in chrome-nickel stainless steel
  • Double shaft seal with oil chamber separates the motor from the water and provides further protection against accidental operation when dry

Operating conditions

  • Liquid temperature up to 50° C.
  • Maximum immersion depth: 5 m.
  • Minimum water level with float: GXR = 70 mm
  • Minimum water level manual operation: GXR = 15 mm
  • Continuous duty.

Motor

  • G1 1/4" vertical, upward delivery port for installation in small pits
  • Rated motor power output - 0.37kW
  • 2-pole induction motor, 50 Hz (n ≈ 2900 rpm). 
  • Incorporated capacitor.
  • Insulation class F.
  • Protection IP X8 (for continuous immersion) Double impregnation humidity-proof dry winding.
  • Constructed in accordance with: EN 60034-1; EN 60335-1, EN 60335-2-41.
  • Options:single phase 240V or three phase 400V

gxr-curve-9

Product Specification

  • Product Code: CAL
  • Fuel Type: Grey Water, Water
  • Guarantee: 2 Year
  • Outlet Size: 1 1/4"
  • Shipping: Free Delivery
  • Weight: 5.200kg, 6.700kg
  • Dimensions: H:300mm
  • Diameter: 176mm

Delivery Terms

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

Returns Information

ORDER CANCELLATION 

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie 


After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS 

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss. 

Downloadable Documents

People who bought this also bought...