FLEDBAG PROFI

Product Ref: 0101003

Free Delivery

low stock Low stock

updown
€222.20 ex VAT
(€273.31 inc VAT)
You may also need:
FLEDBAG ORIGINAL
FLEDBAG ORIGINAL
€125.80 ex VAT
(€154.73 inc VAT)
FLEDBAG EASY
FLEDBAG EASY
€125.80 ex VAT
(€154.73 inc VAT)

Product Description

FLEDBAG PROFI

The FLEDBAG® Profi combines both the Original and Easy products in one package. This innovation FLEDBAG® Original product lets you store big bags of feed, fertilizer etc safely and comfortably and empty their contents easily, quickly and precisely. The FLEDBAG® Original is suitable for disposable big bags and reusable big bags.

The FLEDBAG® Original has a reinforced chisel tip for easier penetration into the bag fabric. The innovation Vario gate valve allows for flexible doage and has a steady and stable base. It has flexible folding handles so that on lowering the handles do not break off if the tonne bag is still swinging. There is no corrosion and can withstand the highest loads. 

Specification:

  • Suitable for animal feed, fertilizer, seeds, pellets, salt and granules
  • Material: Polyamide with glass fiber
  • Average flow depending on material density: 200 - 700 kgs/ minute
  • Material rivets: Stainless steel
  • Material screws: Galvanized
  • Inner diameter: 140mm
  • Height: 470mm
  • Weight: 1.79kg

How does the FLEDBAG® Original work?

1. Deposit the FLEDBAG® on a firm surface. Lift the big bag by its loops using front loader or forklift forks, and position above the FLEDBAG®.

exp1

 

2. Lower the big bag so that the FLEDBAG® penetrates the big bag, then raise the big bag again.

exp2

 

3. Pull the FLEDBAG® down slightly to make it easier to open and close the valve.

exp3

 

4. By opening and closing the FLEDBAG®, you can simply meter the content of the big bag.

exp4

 

How does the FLEDBAG® Easy work?

1. Open the first knot on the big bag outlet and push the tensioning ring onto the protruding discharge hose.

li1

2. Position the FLEDBAG® Easy on the discharge hose from underneath.

li2

3. Pull the tensioning ring down, and fasten the tensioning ring with the discharge hose on the FLEDBAG® Easy. Do not attach the tensioning ring at the top edge, but along the neck of the FLEDBAG®.

li3

4. Open the second knot on the outlet so that the content can run into the FLEDBAG® Easy. Open the slide to empty.

li4

 

Product Specification

  • Product Code: OMP
  • Colour: Yellow
  • Shipping: Free Delivery
  • Weight: 1.790kg
  • Dimensions: H:470mm
  • Diameter: 140mm

Delivery Terms

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

Returns Information

ORDER CANCELLATION 

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie 


After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS 

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss. 

Video

You may also like...

People who bought this also bought...