Grid
List
SPILLSTOP OVERFILL PREVENTION VALVE
SPILLSTOP OVERFILL PREVENTION VALVE
The SpillStop 2" Overfill Prevention Valve protects both the environment and the individual from the effects of fuel spillage. This overfill protection device is suitable for use on both fuel and diesel storage tanks, which may have a pumping or gravity feed system. Once the tank has reached its maximum fuel capacity, this valve will close to prevent any...
TIGERLOOP ORIGINAL
TIGERLOOP ORIGINAL
The new and improved third generation automatic oil de-aerator.
The Tigerloop pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump.
The TigerLoop De-aerator effectively removes all gas/air bubbles from the oil system, helping to eliminate any oil pump and nozzle problems associated with gas/air in the...
TIGERLOOP BIO
TIGERLOOP BIO
The new and improved third generation automatic oil de-aerator.
The Tigerloop Bio pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump.
The Tigerloop Bio is used in combination with a separate oil filter.
The benefits of Tigerloop are applicable anywhere you use a light oil burner. The Tigerloop Bio is...
TIGERLOOP COMBI
TIGERLOOP COMBI
The new Tigerloop Combi offers several advantages thanks to the integrated oil filter. The installation is done with fewer connections, simplifying work and reducing the risk for leakage.
The Tigerloop pre-heats the oil to at least room temperature by absorbing the heat from the boiler room and friction heat from the oil pump.
The benefits of Tigerloop are applicable anywhere...
1" TANK REDUCER
1" TANK REDUCER
25mm reducer
19" RETROFIT GREEN SCREW CAP
19'' RETROFIT GREEN SCREW CAP
19 inch retrofit lid includes sealant lid
4 inch LOCKABLE OIL TANK LID
4 inch LOCKABLE OIL TANK LID
4" Lockable Oil Tank Inspection Cap in oil resistant polymer. Suitable for retrofit to Harlequin tanks incorporating an existing 4" Inspection Aperture and Screw Cap. Accepts key or combination padlocks providing a visible deterrent against fuel theft.
Supplied complete with:
4" Cap and brackets
Self tapping screws
Dipstick attachment point
Suitable...
8" OIL TANK LID
8'' OIL TANK LID
8 Inch lid (c/w bar and pin) for old oil tanks
ATLAS 16" OIL TANK LID BLUE
ATLAS 16" OIL TANK LID BLUE
Replacement lockable 16" lid (approx. dimension) for ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point.
Supplied complete with:
Lockable Plastic Manhole Lid
Retention Ring
Weatherproof Gasket
ATLAS 18" OIL TANK LID
ATLAS 18'' OIL TANK LID
Replacement lockable 18'' lid (approx. dimension) for ATLAS bunded oil tank only.
New Style; operated by silver key
Old Style; operated by triangle plastic key
ATLAS 6" OIL TANK LID
ATLAS 6'' OIL TANK LID
Replacement 6'' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only. Fits onto the tank inspection point/inlet.
BOTTOM OUTLET KIT
BOTTOM OUTLET KIT (Oil Tank Fitting Kit)
This kit includes practically everything you need to connect your heating oil tank to the supply pipe.
Includes the following:
Isolation ball valve
52 micron disposable nylon filter element
10mm copper compression fitting outlet
1" male BSPT tank fitting adaptor
Roll of PTFE tape
BUND WARNING ALARM
BUND WARNING ALARM
This clever 9v battery powered Bund Warning Alarm allows you to check for the presence of liquid inside the bunded area of your oil tank on demand eg. as a result of condensation, tank leaks or in the case of overfill.
This allows you to make timely arrangements for the removal of any surplus liquid from the bunded area, thereby maintaining the integrity of your oil tank.
FUELMASTER & TRUCKMASTER LOCK
FUELMASTER & TRUCKMASTER LOCK
Lock for all Titan FuelMaster and TruckMaster tanks.
LID LOCKING STUD
LID LOCKING STUD
Button lock for 19'' Titan Oil Tank Lid and 6'' Titan Oil Tank Inspection Cap.
LOCKING LOOP & NUT
LOCKING LOOP & NUT
This locking hoop and nut can be used for all tanks within the Titan range.
LRC PROBE
LRC PROBE
This failsafe overfill prevention device, when connected to the LRC Drivers Unit, allows delivery personnel to control refuelling from the tank. Unlike old-fashioned mechanical overfill prevention valves, in the event of system failure, the supply of fuel is discontinued automatically.
Exceeds all applicable overfill prevention requirements and is fully compliant with EN13616.
OFFSET FILL ASSEMBLY COMPLETE
OFFSET FILL ASSEMBLY COMPLETE
2'' offset fill-point which can be used across the range of Titan oil tanks and any other type of plastic oil tank.
This comes complete both gaskets, aluminium locking nut and the offset cap.
OFFSET FILLER CAP
OFFSET FILLER CAP
2'' cap used on the offset fill-point.
This is a standard part right across the Titan range.
Cap can also be purchased as part of a complete offset fill-point (019606).
OIL TANK 2" BSP RED PLUG CAP
OIL TANK 2'' BSP RED PLUG CAP
This part was Green on most tanks when first produced - screws into place.
TITAN 1/2" BALL VALVE
TITAN 1/2'' BALL VALVE
This ball valve can be used across the entire Titan tank range. (1/2'' connection for tank pack)
TITAN 16" HINGED OIL TANK LID GREEN
TITAN 16'' HINGED OIL TANK LID GREEN
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks only. Old style green arm hinged lid.
Includes the gasket 000325.
This lid is for the older Titan bunded tanks (pre 2004/2006 approx.)
TITAN 16" OIL TANK LID RED
TITAN 16'' OIL TANK LID RED
Replacement 16'' (approx. dimension) oil tank lid for TITAN oil tanks and some ATLAS tanks. Old style red arm hinged lid.
TITAN 19" OIL TANK LID
TITAN 19'' OIL TANK LID
Replacement 19''(approx. dimension) oil tank cap lid for TITAN oil tanks only.
This lid is for the newer Titan bunded tanks (after 2004/2006 approx.)
TITAN 24" OIL TANK LID
TITAN 24'' OIL TANK LID
Replacement 24'' (approx. dimension) oil tank lid for TITAN oil tanks only.
TITAN 4" OIL TANK LID
TITAN 4'' OIL TANK LID
Replacement 4'' (approx. dimension) screw cap for TITAN bunded oil tanks only. Fits onto the 4'' tank inspection point/inlet (old Style).
Please Note:
Only the lower rubber seal is included in this product.
TITAN OIL TANK 2" VENT CAP
TITAN OIL TANK 2'' VENT CAP
Replacement 2'' vent cap for TITAN oil tanks only.
TITAN OIL TANK 6" INSPECTION CAP
TITAN OIL TANK 6'' INSPECTION CAP
Replacement cap for TITAN oil tanks only.
Fits onto the tank inspection point/inlet (new style).