Grid
List
110MM GROMMET C/W 10MM THROAT
110MM GROMMET C/W 10MM THROAT
These grommets are used for inlet and outlet pipes for Septic tanks and also for Sewage treatment tanks.
20mm x 3/4 BSP Female Adapter
20mm x 3/4 BSP Female Adapter
3 POLE ISOLATOR SWITCH
3 POLE ISOLATOR SWITCH
3 Pole Non Fused lockable Isolator Switch with high impact grey polycarbonate enclosure, UV stabilised to IP66/67, Complete with 1no fuse block
BIOTEC ENKAMAT NETTING 1M
BIOTEC ENKAMAT NETTING 1m
Thickness: Approx. 10mm
This webbed matting is placed over the media bale of a sewage treatment plant. Enkamat netting is to be used on the media bale in the Sewage Treatment Plants to prevent large contaminants from getting into the media core.
We recommend you use 2 metres of this to replace existing Enkamat on top of bale as required.
BIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tapt
BIOTEC P6 SCREEN ASSEMBLY
BIOTEC P6 SCREEN ASSEMBLY
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tapt
CHARLES AUSTEN ENVIROSURE 100 LOW PRESSURE ALARM
Charles Austen Envirosure 100 Low Pressure Alarm
Perfect for detecting if a blower in a sewage system is failing
Detects aeration pump failures or power cuts immediately
Compact, lightweight , low power consumption, minimal running costs
Multiple variants – options include bright LED beacon, plug-in or hardwire
Versatile installation – installs in minutes with quick fit...
CHARLES AUSTEN ENVIROSURE BEACON
Charles Austen Envirosure Beacon
Perfect for helping detect if a blower in a sewage system is failing.
Can be bought to run along side the charles austen low pressure alarm
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-120 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-150 CHARLES AUSTEN BLOWER SERVICE KIT
ET-150 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-150 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-200 CHARLES AUSTEN BLOWER
ET-200 Charles Austen Blower
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
ET-250 CHARLES AUSTEN BLOWER
ET-250 Charles Austen Blower
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
HIGH LEVEL ALARM (MID)
HIGH LEVEL ALARM (Mid Range)
HIGH LEVEL ALARM KIT (SMART)
HIGH LEVEL ALARM KIT (SMART)
Suitable for lots of unit's that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also a small discharge pump or Air-blower can be wired into this panel.
Kit Includes :-
Control Panel
Low Voltage Beacon
High Level Float Switch
KLARGESTER BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P18-P25
KLARGESTER BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P18-P25
P006 BALE
P006 Bale
Come complete with strapping, buckles and Enkamat matting to suit.
P006 STEEL BEAM
P006 Steel Beam
Fully galvanised steel beam to suit P006 Biotec sewage treatment system. Is used to support filtration bale
P006-012 HOSE REDUCER
P006-012 HOSE REDUCER
5/8 th" Hose Joiners used in P006-012 BioTec
€9.20 delivery will be added to you shopping cart.
P012 STEEL BEAM
P012 Steel Beam
Fully galvanised steel beam to suit P012 Biotec sewage treatment system. Is used to support filtration bale
PUMPWELL (1 METRE) PIPEWORK
PUMPWELL (1 METRE) PIPEWORK
PUMPWELL (1.5 METRE) PIPEWORK
PUMPWELL (1.5 METRE) PIPEWORK
PUMPWELL ASSEMBLY
Pumpwell Assembly
1no IPS Pumpwell
2no Scrum Baffle
To be used to convert your gravity system into an IPS unit (Pumped Outlet)
SCL 15 DH .37KW BLOWER
SCL 15 DH .37KW BLOWER
Aluminium alloy construction, High efficiency impeller,
SECOH JDK-S-250 SINGLE SERIES BLOWER
SECOH JDK-S-250 SINGLE SERIES BLOWER (EL-250)
The JDK models are a direct replacement of the EL series of blower - these also feature up to 30% less energy consumption as well as being more compact than the EL series.
Long life expectancy
All parts of the motor are combined into one single construction. The combination of a compact and light construction mixed with the uncomplicated...
SINGLE PUMP HIGH LEVEL ALARM
Single Pump High Level Alarm
High Level alarm unit complete with float
SMALL GREY KIOSK
Small Grey Kiosk
Strong Polypropylene Plastic Kiosk complete with small lock and keys.
406mm wide
330mm deep
686mm high
SOLENOID TIMER
Solenoid Valve Programmable Cycle Timer
Programmable Timer for use with most Solenoid valves , programmable On & Off to cycle over a period of set times, fully automatic and easy to install
This time is able to cycle between Off cycle: 0.5 to 10 seconds, 0.5 to 45 minutes, 0.5 to 60 minutes and 25 to 150 minute and On cycle: 0.5 to 10 seconds, 0.25 to 5 minutes, 0.5 to 10 minutes and 0.5...
SOLENOID VALVE
SOLENOID VALVE
To be used with the solenoid timer on below link :-
Solenoid Timer
Used in Bioficient unit
Stainless Steel Hose Fixing
Stainless Steel Hose Fixing
25-35mm
€9.20 delivery will be added at the Shopping Cart
TREATMENT TANK CONTROL PANEL (SMART)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control...
24 VAC Impulse Relay
24 VAC Impulse Relay
These realys are used in Klargester Biodiscs, Biotecs and Bioficients, The contacts are actuated with every current pulse and they stay in the operating position they have adopted in each case until the next pulse occurs. It is possible to actuate the contacts manually by pressing a pushbutton provided on the unit. The contact position is shown by an indicator. The units can...
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
3.15 AMP FUSE FOR GREEN PANEL
3.15 AMP FUSE FOR GREEN PANEL
3.15amp Motor-Blower fuse for the Small Green Control Panel.
3/4" HOSE CLEAR BRAIDED per metre
A delivery charge of €9.20 + vat will be added to the order at the checkout.
5 AMP FUSE FOR GREEN PANEL
5 AMP FUSE FOR GREEN PANEL
5amp Motor-Blower fuse for the small Green Control Panel.
ACCESS COVER KEY
ACCESS COVER KEY
Access cover keys for all Klargester Domestic Sewage Treatment Plants
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
Air Filter to suit ET-60 and ET-80 Charles Austen Blower
AIR LINE REGULATING VALVE 1/2'
AIR LINE REGULATING VALVE 1/2"
1/2 inch air line valve for P6 to P12 unit's
AIR LINE REGULATING VALVE 3/4'
AIR LINE REGULATING VALVE 3/4"
3/4 inch airline valve for P18 to P25 unit's
ANTI-ROTATION WASHER
ANTI-ROTATION WASHER
Anti-rotation washer fitted to all Biodisc and Biotec lid locks
BATTERY PACK FOR GREEN CONTROL PANEL
BATTERY PACK FOR GREEN CONTROL PANEL
Replacement battery pack for Green Control Panel.
BIODISC / BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
BIODISC/ BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
Suitable to fit all BioTec unit lids and P006-P012 BioTec and also suit the BA BioDisc systems.
Please note 2 cover locks are required to secure the lids.
BIOTEC BLOWER COVER BOX
BIOTEC BLOWER COVER BOX
BIOTEC BLOWER HOUSING COMPLETE
BIOTEC BLOWER HOUSING COMPLETE
Plastic Blower Base, Lid & Clips
Suitable for P006 to P025 biotec units.
BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P6-P12
BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P6-P12
Outer cover and surf board together P6-P12
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
The Klargester BioTec Distribution Cone is a blue plastic effluent distribution head which is placed on the end of the pipework to diffuse effluent by spraying directly over the media.
Suitable for the Klargester BioTec 1, 2, 3 and 4 sewage treatment systems
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
If you need a full set of clips, order x4 clips.
These clips match the blower housing on the below link : -
Kingspan Parts Blower Housing (Complete)
A delivery charge of €9.20 + vat will be added to the order at the checkout.