Sewage Treatment Plant Accessories
Tanks.ie are a supplier of replacement parts and spares for Kingspan Klargester Sewage Treat Plants such as Biodisc, Bioficient, Biosafe and Biotec such as blowers, pulleys, belts and bearings.
Featured Products
EBARA BEST FOUR M SUMP PUMP
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
€713.05 ex VAT
(€877.05 inc VAT)
ET-60 AO Charles Austen Blower
ET60 AO Charles Austen Blower
The Charles Austen ET60 A is a linear diaphragm air pump with alarm which provides a clean oil free air source.
This 60 litres per minute capacity is suitable for a wide range of applications including
• Septic tank and Sewage Treatment Plant (STP) aeration
• Aquatic oxygenation for fish ponds and aquariums
• Spas / whirlpools
• Water features
...
€133.52 ex VAT
(€164.23 inc VAT)
Smart Control Panel & Beacon Combo
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control...
€458.75 €399.95 ex VAT
(€491.94 inc VAT)
Grid
List
110MM BLANKING CAP
110MM BLANKING CAP
PVC Plastic Closing Cap To suit standard sewage piping
€24.49 ex VAT
(€30.12 inc VAT)
BIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA
Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media.
The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
from €135.12 ex VAT
(€166.20 inc VAT)
Charles Austen Envirosure Beacon
Charles Austen Envirosure Beacon
Perfect for helping detect if a blower in a sewage system is failing.
Can be bought to run along side the charles austen low pressure alarm
€56.96 ex VAT
(€70.06 inc VAT)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
This Secoh JDK Connector is for all models from 60 - 120.
It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
€35.87 ex VAT
(€44.12 inc VAT)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-Pressure Relief Valve (150-500)
This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged.
Original Black Rubber 90 Degree Hose
2 x Spring Clip Retainers
Setting 0.25 bar
Weight 0.5
19mm ID
21mm...
€26.94 ex VAT
(€33.14 inc VAT)
SECOH JDK-S-40 SINGLE SERIES BLOWER
SECOH JDK-S-40 SINGLE SERIES BLOWER
The JDK models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series.
This model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
Long life expectancy
All parts of the motor are combined into one single construction. The...
€116.23 ex VAT
(€142.96 inc VAT)
3 PHASE TWIN CONTROL PANEL
3 PHASE TWIN CONTROL PANEL
Kingspan / Klargester 3 Phase Twin Control Panel gives the customer security in knowing when something is wrong and that this 415 volt twin control panel will trigger when there is a high water level and pump failure indicated with a red light on the front of the control panel.
This Control Panel is recommended to be housed within a waterproof encloser/Kiosk. These...
€1,250.96 ex VAT
(€1,538.68 inc VAT)
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
If you need a full set of clips, order x4 clips.
These clips match the blower housing on the below link : -
Kingspan Parts Blower Housing (Complete)
€10.64 ex VAT
(€13.09 inc VAT)
€17.76 ex VAT
(€21.84 inc VAT)
€637.21 ex VAT
(€783.77 inc VAT)
€531.61 ex VAT
(€653.88 inc VAT)
FPZ R30-MD Side Channel Blower
FPZ R30-MD Side Channel Blower
The R30-MD FPZ Side Channel Blower is a single impellor “double stage” blower which supersedes the SCL-DH 30 model. A double stage impellor is mounted directly onto the motor shaft for contact-free compression. This blower has a robust aluminium construction.
Product characteristics
1Phase Power
Noise Level: 69.2-72.8 dB
Energy efficient motors...
€2,929.95 ex VAT
(€3,603.84 inc VAT)
P006 BALE
BALE ASSEMBLY P006
Filtration Media to Suit Biotec P006 Sewage Treatment Systems
Comes complete with Enkamat Netting/Matting
€245.21 ex VAT
(€301.61 inc VAT)
€1,149.95 ex VAT
(€1,414.44 inc VAT)
P6-P12 BIOTEC OUTER COVER ONLY
Klargester BioTec Sewage Treatment Plant Outer Cover P6
Made from Glass Reinforced Plastc
Coverd in a green powder coated protective layer
Access cover sold separately
€644.61 ex VAT
(€792.87 inc VAT)
PUMPWELL (1 METRE) PIPEWORK
Pumpwell (1 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufatured in one complete part
€180.53 ex VAT
(€222.05 inc VAT)
PUMPWELL (1.5 METRE) PIPEWORK
Pumpwell (1.5 metre) pipework
Boitec P6-P12 IPS Manifold pipework
Includes Non-return Valve
Material: PVC
Manufatured in one complete part
€186.41 ex VAT
(€229.28 inc VAT)
PUMPWELL ASSEMBLY
Pumpwell Assembly
1no IPS Pumpwell
2no Scrum Baffle
To be used to convert your gravity system into an IPS unit (Pumped Outlet)
€178.29 ex VAT
(€219.30 inc VAT)
ACCESS COVER KEY
Access Cover key
Access cover key for all Klargester Domestic Sewage Treatment Plants
Made from a zinc alloy
Chrome plated
8mm triangle
One supplied
80mm long
€15.64 ex VAT
(€19.24 inc VAT)
€14.95 ex VAT
(€18.39 inc VAT)
€15.78 ex VAT
(€19.41 inc VAT)
€34.69 ex VAT
(€42.67 inc VAT)
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
€834.76 ex VAT
(€1,026.75 inc VAT)
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
The Klargester BioTec Distribution Cone is a blue plastic effluent distribution head which is placed on the end of the pipework to diffuse effluent by spraying directly over the media.
Suitable for the Klargester BioTec 1, 2, 3 and 4 sewage treatment systems
€12.95 ex VAT
(€15.93 inc VAT)
ET-120 CHARLES AUSTEN BLOWER
ET-120 CHARLES AUSTEN BLOWER
Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key...
from €154.95 ex VAT
(€190.59 inc VAT)
ET-150 CHARLES AUSTEN BLOWER
ET-150 CHARLES AUSTEN BLOWER
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
Key...
€267.55 ex VAT
(€329.09 inc VAT)
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS Chain & Link Set for BA or BB Biodisc
1/2 BS Chain & Link Set - Biodisc replacement chain - Can be used on Biodisc Sewage Treatment Systems. This chain can be measured from centre to centre of each link.
Strong,
Simple,
Versitile,
Reliable
This chain comes as standard 5 foot in length
€88.74 ex VAT
(€109.15 inc VAT)
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
Come complete with:
1no pump chamber
1no 300 x 200 x 9mm Polypropylene Sheet
1no BA-BB Biodisc IPS Manifold -
Automatic Pump
€579.95 ex VAT
(€713.34 inc VAT)
BC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley
The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems.
30mm wide
8mm pitch
65mm Plain Bored
80 Teeth
Torerance H9
Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when changing the botttom pulley
€92.75 ex VAT
(€114.08 inc VAT)
BC Pulley Locking Element
BC Pulley Locking Element
This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
€33.21 ex VAT
(€40.85 inc VAT)
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no
This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820
Comes as a pair of 2no
€38.76 ex VAT
(€47.67 inc VAT)
BD/BE BEARING HOUSING
BD/BE BEARING HOUSING
The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems.
This listing is for one single half bearing (Each Biodisc contains 2)
€51.16 ex VAT
(€62.93 inc VAT)
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc
The BD/BE Locking Element for Biodisc is suitable for all Klargester BD/BE BioDisc Sewage Treatment Systems.
The locking element fits into the centre of the pulley and makes sure it is secured to the BioDisc shaft.
RCK40-40x65 SHAFT CLAMPING ELEMENT
€35.05 ex VAT
(€43.11 inc VAT)
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT
Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant
17 Teeth
5/8" Pitch
F7 Tolerence
20mm Wide High Torque Drive Pulley
Bored 20mm
Grubscrew Supplied
British Standard Keyway
€40.95 ex VAT
(€50.37 inc VAT)
€113.15 ex VAT
(€139.17 inc VAT)
BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer)
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units.
Bauer 2000 Series helical geared motor
Supply:
230V/50Hz/1PH
Output power
0.120 kW
Output torque
136 Nm
Output speed
8.3 rpm
Terminal box mounting
B3
Terminal box position
I/A
Terminal...
€926.74 ex VAT
(€1,139.89 inc VAT)
€120.42 ex VAT
(€148.12 inc VAT)
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
€1,314.38 ex VAT
(€1,616.69 inc VAT)
BIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM
This galvanised steel angle Radial Arm for BA-BB biodisc sewage treatment plant, this part hold the discs in place and stops them from turning individually.
€33.28 ex VAT
(€40.93 inc VAT)
CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX
10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. ( Product Ref: 0012363 )
€95.46 ex VAT
(€117.42 inc VAT)
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR
8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox.
This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
€80.09 ex VAT
(€98.51 inc VAT)
€22.26 ex VAT
(€27.38 inc VAT)
Latch Block - Old RBC Lids
Latch Block - Old RBC Lids
latch block complete with bolt for old style klargester RBC unit's
This latch hold the lid in place, comes with bolt and washer
Material: Hardened Teflon plastic
€24.82 ex VAT
(€30.53 inc VAT)
STEPHAN TO PANASONIC CONVERSION KIT
Stephan to Panasonic Conversion Kit
This is a conversion kit to suit a peripheral drive.
Includes:
1no Roller Kit
1no Pinion Wheel
1no New Drive Plate
4no Bolts
8no Washers
4no Nuts
1no Panasonic Motor Gearbox
1no galvanised steel mount
4no Bolts
1no capasitor
€699.95 ex VAT
(€860.94 inc VAT)
24 VAC Impulse Relay
24 VAC Impulse Relay
These realys are used in Klargester Biodiscs, Biotecs and Bioficients, The contacts are actuated with every current pulse and they stay in the operating position they have adopted in each case until the next pulse occurs. It is possible to actuate the contacts manually by pressing a pushbutton provided on the unit. The contact position is shown by an indicator. The units can...
€92.75 ex VAT
(€114.08 inc VAT)
BC,BD,BE Helical Motor/Gearbox (Bauer)
BC,BD,BE Helical Motor/Gearbox (Bauer)
This is a Bauer BG10 Motor and Gearbox suitable for the Klargester BC, BD and BE Biodisc Sewage Treatment Systems.
The motor and gearbox is pre-installed with a start/run capacitor and keyway steel. The motor & gearbox also includes an information booklet with wiring diagrams.
Type:BG10Z-11/ECO4LA4/SP
Phase:Single
Voltage:240V
Shaft Size:20mm
Speed:-...
€508.22 ex VAT
(€625.11 inc VAT)
BIODISC BA/BB LID EXTENSION NECK 500mm
BA/BB BIODISC LID EXTENSION NECK 500mm
Allows sewage treatment system to set at the correct level to achieve the recommended gradiant for the external pipework
€471.95 ex VAT
(€580.50 inc VAT)
BIODISC BA/BB NYLON WASHERS
BA/BB BIODISC NYLON WASHERS
PRICE IS FOR SINGLE WASHER**
BA / BB BioDisc Nylon spacer washers used for the shaft.
We recommend to order x6 in total.
A delivery charge of €9.20 + vat will be added to the order at the checkout.
€10.95 ex VAT
(€13.47 inc VAT)
Sewage Treatment Plant Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.