UV DISINFECTION UNIT 5GPM (20LPM)

Product Ref: 2502020001

Water Yes Free Delivery

updown
€380.71 ex VAT
(€468.27 inc VAT)
You may also need:
10' WATER FILTER 5 MICRON CARTRIDGE
10' WATER FILTER 5 MICRON CARTRIDGE
€18.93 ex VAT
(€23.28 inc VAT)
10' FILTER HOUSING
10' FILTER HOUSING
€39.29 ex VAT
(€48.33 inc VAT)
SURESTOP I-WATER SMART CONTROL HOME PACK
SURESTOP I-WATER SMART CONTROL HOME PACK
€160.26 from €150.00 ex VAT
(€184.50 inc VAT)
SURESTOP STOPCOCK WITH REMOTE SWITCH
SURESTOP STOPCOCK WITH REMOTE SWITCH
€66.30 from €61.00 ex VAT
(€75.03 inc VAT)
SURESTOP STOPCOCK
SURESTOP STOPCOCK
€35.78 from €30.00 ex VAT
(€36.90 inc VAT)

Product Description

UV DISINFECTION UNIT 5GPM (20LPM)

UV is a useful disinfection method of removing micro-organisms from water to make it safe to use. The UV Disinfection Units use UV light to destroy bacteria, viruses, spores and moulds and their ability to reproduce. Ultraviolet disinfection is extremely fast, it requires no chemicals or additives and cannot be overdosed. No chemical residuals are left in the treated water. The UV intensity (dose) is measured in mJ/cm2. For domestic situations UV systems should give at least 30 mJ/cm2 and for larger industrial systems 40 mJ/cm2. The dose required to inactivate bacteria depends on the bacteria.  The higher the dose of UV the more of each bacteria are killed. 

The UV disinfection unit eliminates the risk of overdoing using chemicals or leaving an unpleasant taste. UV sterilizers are low maintenance and are cheap to run. These systems are designed for low to medium flow rate applications. The lamps offer a full 1 year lifespan and inexpensive replacement costs.

All systems incorporate the latest high frequency lamp driver circuitry with lamp

  • operating / failure warning lights
  • 9000 hour life output UVC lamps
  • 304 mirror finish stainless steel construction

Typical Applications:

  • Drinking water from wells, springs and other untreated supplies
  • Water filtration and treatment plants
  • Fish farms, for the control of micro-organisms
  • Algae control in onds and general aquatic use
  • Re-circulating loops and high purity water systems

This UV disinfection unit requires 10" Filter Housing with 10" Water Filter 5 Micron cartridge to be installed ahead of the UV unit.

Specification:

GENERAL INFORMATION  
Max flow rate 19 l/m
UVC transmittance 99%- 1 cm
UVC dose 300 J/m2
Water Temperature range 5-50° C
Total consumption 33 W
Mounting Vertical or horizontal
   
UV REACTOR  
Material Stainless Steel 304 (optional 316L)
Connections Thread ¾” M
Total Volume 1 l
Total weight 1.5 kg
Max working pressure 10 bars g
Protection class IP 54
Shape U
Flow direction From bottom to top
   
UV LAMP  
Number  1
Lifespan 9000 hr
Lamp power 30 W
Type Low pressure type 028102
   
CONTROL PANEL AL2  
Material Thermoplastic
Dimensions 118 x 60 x 64 mm
Protection class IP 54
Ambient temperature range 5 – 45 °C
Power supply 230 V - 50/60 Hz
Lamp cable length 1m
Power supply cable 1m
Feed plug SCHUKO, UK or passing wires
Monitor display LCD SITA
Days meter Yes for total system life
Resettable days meter Yes for lamp life control
Audio alarm With silence options

 

Product Specification

  • Product Code: PWG
  • Fuel Type: Water
  • Potable: Yes
  • Shipping: Free Delivery
  • Weight: 1.500kg
  • Dimensions: L:524mm
  • Diameter: 60mm

Delivery Terms

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

Returns Information

ORDER CANCELLATION 

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie 


After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS 

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss. 

You may also like...

People who bought this also bought...