WATERBOOST LITE 200L (SINGLE PUMP)

WATERBOOST LITE 200L (Single pump)
Durable pump for reliable fluid transfer in domestic, agricultural and industrial environments. Low maintenance, high performance.
Estimate delivery costs
Your Eircode lets us show an accurate delivery cost before checkout.
Direct Pumps & Tanks
What makes this pump) the right choice?
Water Boost Lite 200 Litre Compact All In One Booster Package
The Water Boost Lite booster set has been engineered to be a high-performance solution offering minimal downtime and to fit in a compact space whilst offering up to a maximum of 80 L/min and pressures of up to 5.0 bar. The system comes with all connectors needed to connect the pump system to the chamber; this makes installation quick and simple in any project application.
Offered in a single-pump configuration, each system combines the DAB Esybox Mini3 pump with a durable MDPE chamber, available in three different KUKREG4-approved chambers:
- 200 Litres
- 300 Litres
- 550 Litres
The pump is equipped with advanced functionality, including fault signal alerts, error code displays, and seamless connectivity to the DAB digital app. The system also comes with all required connectors, ensuring fast and straightforward installation for any project.
Key Features
- HDPE KUKREG4-approved chamber
- DAB Esybox Mini3 variable speed pump
- Maximum flow rate of 80 l/min (Q Max)
- Head pressure up to 5 bar
- Quick and simple setup
- Ultra-quiet operation
- Digital display interface
- High-efficiency motor
- Vibration-free performance
Applications:
- Suitable for domestic and commercial cold water boosting applications where space is limited.
- Residential properties
- Commercial buildings
- Industrial properties
- Wash-down areas
Specifications:
| Model |
Capacity |
Dimensions |
Outlet |
| WBL/300 | 200 | Dia 610 mm x 820 mm H | 1" BSP |
| WBL/450 | 300 | Dia 610 mm x 1200 mm H | 1" BSP |
| WBL/550 | 550 | Dia 780 mm x 1200 mm H | 1! BSP |
Technical data
Full specifications
| Physical | |
| Capacity | 200 L |
| Diameter | 610 mm |
| Empty weight | 45 kg |
| Construction | |
| Material | MDPE |
| Reference | |
| SKU | WBL/300 |
| EDEL code | EDELP00002097 |
Irish regulations
Installation & requirements
OFTEC regulation
All domestic oil tank installations in Ireland must be carried out by an OFTEC-registered technician. The tank must conform to IS:293 and be sited in accordance with IS:820.
Site requirements
The tank must stand on a level, load-bearing concrete base minimum 100 mm thick, extending 300 mm beyond the tank footprint on all sides. Ground must be clear of vegetation.
Bunding requirements
Bunded tanks are required within 10 m of a watercourse or drain. Secondary containment must hold 110% of the inner tank capacity. Check local planning conditions before installation.
Verified customers
What buyers say
Still not sure which tank you need?
Our specialists have advised thousands of Irish customers. Free advice, no obligation.