W1-100 Klargester Washdown Separator

Product Description

W1-100 WASHDOWN SEPARATORS

The Klargester W1-100 Washdown Separator can be used in areas such as car wash and other cleaning facilities that discharge directly into a foul drain, which feeds into a treatment facility. Such wash down facilities must not be allowed to discharge directly into surface water but must be directed to a foul connection leading to a municipal tretment works as they utilise emulsifiers, soaps and detergents to dissolve and disperse oils.

Uses:

Car Wash
Tool hire depots
Truck cleansing
Construction compounds cleansing points

Features:

Light and easy to install
Inclusive of silt storage volume
Fitted inlet/outlet connectors
Vent points within necks
Extension access shafts for deep inverts
Maintenance from ground level

Specifications:

Suitable for 20-30 cars or 16-20 lorries per day
Capacity: 10000 litres
Maximum rec silt: 5000
Maximum Flow Rate: 27 litres per second
Access shaft diameter: 600mm
Base to inlet invert: 2005mm
Base to outlet invert: 1955mm
Standard fall across unit: 50mm
Minimum inlet invert: 500mm
Standard pipework diameter: 160mm

washdown-spec

DO YOU REQUIRE COMMISSIONING?

To ensure your system operates to maximum efficiency, we recommend tried and tested commissioning by Klargesters own trained engineers.
Our unrivalled knowledge means that we are best placed to carry out bespoke assessments to get your system up and running. The commissioning will also provide you with a unique checklist against your system, ensuring your complete peace of mind and reassurance that your system's mechanical and electrical components are in good working order.

WHAT'S INCLUDED IN THE COMMISSIONING? CLICK HERE FOR MORE INFORMATION

*DELIVERY TERMS

All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.

HIAB off-loading is available at extra cost, if requested.

It is the responsibility of the customer to inform us, if off-loading equipment is required.

Service and Maintenance:

It is essential that you ensure your separator is properly serviced and maintained to remain compliant with EN 858-1 standard and prevent pollution due to blockages. Kingspan's service and maintenance packages have been developed using their expert knowledge of their separators to help keep your separator operating at optimal efficiency, therefore remaining non-polluting and compliant. Visit Kingspan Service or contact the Kingspan Team on 0818 543 500 or for more information on the packages available.

Product Specification

Product Code: KLA
Material: GRP
Shape: Underground
Shipping: Customer Off Loading, Free Delivery
Volume: 10000ltr
Weight: 680.000kg
Dimensions: L:3915mm
Diameter: 2020mm

Do You Require Commissioning?

Offering comprehensive commissioning packages, to not only ensure your system is running optimally at all times (which in turn saves you money), it also maintains your warranty of your system.

It's an important step in the installation process and an essential part of planning and building regulation sign off. Commissioned by qualified service engineers, supplying a certification of commissioning for your records.

During the commissioning visit, our network of skilled engineers can install SmartServ Pro onto your system. SmartServ Pro has been developed to remotely monitor the performance of our system at the touch of a button. You can access the information anytime, anywhere on your phone or laptop.

On what products are the commissioning packages offered?

We can carry commissioning for the following products -

Domestic Sewage Treatment Plants
Commercial Sewage Treatment Plants
Fuel/Oil Separators
Pump Chambers (Single Pump)
Rainwater Harvesting Units

If I select commissioning, what's involved?

We offer 2 types of commissioning depending on what unit you require it for. We can offer the standard commissioning or a smart commissioning.

What's the difference between the Standard and Smart Commissioning?

Standard

A basic package with the following benefits:

Peace of mind - rest assured that all mechanical and electrical components have been installed correctly and tested to make sure they are working as intended.
Trouble-free operation of your system from the start.
You will be issued with a full commissioning certificate for your system.
Available on our full range of wastewater and surface water products.

Smart

Offers all the benefits of the standard commissioning plus the following:

Under EN 858-2, (specific to separators only) it is recommended that you install a local or remote alarm to your separator in order to prevent pollution incidents - our package includes SmartServ Pro remote monitoring with early fault detection.
Comprehensive asset tracking, removing local reliance to monitor operation status.
Less risk of business downtime - with our SmartServ Pro solution, you can proactively tackle operational problems before they impact your business.
Instant text alerts to site contacts (up to 14) and Kingspan Service Centre simultaneously.

Click here to find out more information regarding what's carried out for a commissioning on each unit.

Delivery Terms

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier.

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request.

Returns Information

ORDER CANCELLATION

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie

After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325.

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee.
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss.