Grease Cartridge (Chain Type)

Product Ref: 0011096

Free Delivery

1-3 days delivery

Bulk discounts available:
6+ @ €36.95 each
10+ @ €36.29 each

updown
€45.29 ex VAT
(€55.71 inc VAT)

Product Description

Grease Cartridge (Chain Type)

This is a pre-charged autogreaser which fits onto the chain guard to supply grease to the drive chain on BioDisc units BD, BE and BF. It is one of the most effective alternatives to manual lubrication.

The grease cartridge has 7 different settings allowing you to set effiently depending on your application. Operates under a wide temperature range and can be installed upto 5 metres away from the application. Has a pressure release valve notifing you when there is a blockage. 

Can be used for the following aplications:-

  • Roller bearings
  • Plain Bearings/Slides
  • Linear Guides
  • Gears
  • Chains

 

Foundries - Underground & Surface Mining - Plastic Moulders - Oil Refineries/Rigs - Lifts/Elevators - DocksideEquipment - Airports - Steel Manufacturing

 

What is a Greasomatic?

A self-ejecting canister of lubricant designed to screw into a grease nipple socket or other lubrication point, and discharge its content of 120 ml of lubricant in a controlled continuous flow, for a preselected period of between one month and twelve months. It is completely self contained and needs no pumps, motors, electricity or compressed air. Once fitted and activated it will work without attention until its allotted lifespan is over.

How It Works

Each GREASOMATIC contains its own unique chemical expulsion unit. This has no springs or mechanisms but relies on an unvarying law of nature. Built into the top of each GREASOMATIC is a flexible rubber expansion chamber containing a liquid electrolyte and a galvanic element. The unit is activated by injecting the galvanic element into the electrolyte. The resultant electro-chemical reaction generates a steadily increasing amount of gas, which gradually expands against a piston, to extrude the lubricant slowly but surely into the bearing to which the GREASOMATIC is fitted. The chemicals and gas remain hermetically sealed within the expansion chamber so that no contamination of the lubricant can occur, even after the unit itself is spent. During the working life of the GREASOMATIC, an indicating ring on the ejection piston shows through translucent windows in the body to enable the discharge state to be monitored.

 

Product Specification

  • Product Code: KSP
  • Shipping: Free Delivery

Delivery Terms

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

Returns Information

ORDER CANCELLATION 

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie 


After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS 

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss. 

Video

Downloadable Documents

People who bought this also bought...