BYPASS SEPARATOR NSBP3
BYPASS SEPARATOR NSBP3
ByPass Separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. Each ByPass Separator design includes the necessary volume requirement for:-
Oil separation capacity
Silt storage capacity
Oil storage volume
Coalescer
Features and...
BYPASS SEPARATOR NSBP4
BYPASS SEPARATOR NSBP4
ByPass Separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. Each ByPass Separator design includes the necessary volume requirement for:-
Oil separation capacity
Silt storage capacity
Oil storage volume
Coalescer
Features...
BYPASS SEPARATOR NSBP6
BYPASS SEPARATOR NSBP6
ByPass Separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. Each ByPass Separator design includes the necessary volume requirement for:-
Oil separation capacity
Silt storage capacity
Oil storage volume
Coalescer
Features...
BYPASS SEPARATOR NSBE10
BYPASS SEPARATOR NSBE10
ByPass Separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. Each ByPass Separator design includes the necessary volume requirement for:-
Oil separation capacity
Silt storage capacity
Oil storage volume
Coalescer
Features...
BYPASS SEPARATOR NSBE15
BYPASS SEPARATOR NSBE15
ByPass Separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. Each ByPass Separator design includes the necessary volume requirement for:-
Oil separation capacity
Silt storage capacity
Oil storage volume
Coalescer
Features...
BYPASS SEPARATOR NSBE20
BYPASS SEPARATOR NSBE20
ByPass Separators fully treat all flows generated by rainfall rates of up to 6.5mm/hr. This covers over 99% of all rainfall events. Flows above this rate are allowed to bypass the separator. Each ByPass Separator design includes the necessary volume requirement for:-
Oil separation capacity
Silt storage capacity
Oil storage volume
Coalescer
Features...
OILSET SEPARATOR ALARM
OILSET SEPARATOR ALARM
The OilSET Separator level alarm instrument is specially designed for oil and water separators and grease traps. It is approved according to ATEX Directive 2014/34/EU.The OilSET separator indicates when it is time to empty the separator and thus prevents harmful hydrocarbon emissions to the sewer system.
The OilSET Separator Alarm has great advantages:
No calibration,...
SMARTSERV PRO
SMARTSERV PRO
The Kingspan SmartServ Pro Condition Monitor remote monitoring system allows you to enjoy complete peace of mind, with total visibility of your wastewater systems performance as well as improved pollution prevention and compliance. Kingspan SmartServ Pro remote monitoring system has been developed to help owners connect their buildings and equipment to their building management or...
KINGSPAN - HIGH OIL OUTDOOR ALARM
Kingspan - High Oil Outdoor Alarm
The Kingspan separator Oil alarm is powered by mains & is supplied with a control unit and a Grease Conductivity probe.
You can monitor up to 3 probe units and the outlet relay enables the status of each unit to be signalled to a remote location of your choosing. The alarm can be installed up to 300m from the control panel (Cabling will need to be purchased...
KLARGESTER AQUAOIL
Klargester AquaOil Bypass MDPE & GRP and Full Retention MDPE & GRP Separator Range
Klargester AquaOil bypass light liquid separators and full retention light liquid separators are classified as effective spill containment systems that meets the BS EN858-1:2002 Class I effluent targets at low flow rates.
AquaOil separators are available with capacities of up to 69,444m2 and for flow rates...