Featured Products
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
€POA
GRP Kit / Fibreglass Repair Kit (2m)
(€145.62 inc VAT)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
€118.39 ex VAT (€145.62 inc VAT)
ET-40 CHARLES AUSTEN BLOWER
(€118.62 inc VAT)
ET-40 CHARLES AUSTEN BLOWER
The ET40 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features.
Product Features
• Green drive technology - energy efficient motors so low power consumption
• Specially formulated diaphragm material...
€96.44 ex VAT (€118.62 inc VAT)
Grid
List
BD/BE Locking Element for Biodisc
BD/BE Locking Element for Biodisc
The BD/BE Locking Element for Biodisc is suitable for all Klargester BD/BE BioDisc Sewage Treatment Systems.
The locking element fits into the centre of the pulley and makes sure it is secured to the BioDisc shaft.
RCK40-40x65 SHAFT CLAMPING ELEMENT
BD/BE TOP PULLEY FOR BIODISC
TOP PULLEY FOR BD/BE BIODISC SEWAGE TREATMENT PLANT
Top Pulley suitable for the motor shaft of the Klargester BD/BE BioDisc Sewage Treatment Plant
17 Teeth
5/8" Pitch
F7 Tolerence
20mm Wide High Torque Drive Pulley
Bored 20mm
Grubscrew Supplied
British Standard Keyway
BD/BE/BF DUPLEX DRIVE CHAIN - 102 PITCHES
BD/BE/BF Duplex Drive Chain - 102 pitches
The BD/BF 5/8" duplex drive chain is suitable for all Klargester BD/BE/BF BioDiscs (2m length)
BF BIODISC COVER ASSEMBLY
BF BIODISC COVER ASSEMBLY
BF Bottom Pulley for Biodisc
BF Bottom Pulley for Biodisc
The BF BioDisc Bottom Pulley fits the main media shaft on all Klargester BF BioDisc Sewage Treatment Systems.
A BF BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
BF-TOP-PULLEY-BIODISC
BF-TOP-PULLEY-BIODISC
The BF top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BF top pulley comes with a grubscrew to lock into position
17T 5/8 INCH DUPLEX PINION BORED 25mmF7.
BF/BG Drive End Bearing (45mm)
The BF/BG Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants.
Price includes seals, housing, locking ring and bearing.
See images 3 & 4 for technical data on the bearing.
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element
This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
BF/BG Non Drive End Bearing
BF/BG Non Drive End Bearing
The BF/BG Non Drive End Bearing (45mm) is suitable for all BF/BG Klargester BioDisc sewage treatment plants.
Price includes seals, housing, locking ring and bearing.
See images 3 & 4 for technical data on the bearing.
BG-Bottom-Pulley
BG-Bottom-Pulley
This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft.
This requires a BG Pulley locking element
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BG top pulley comes with a grubscrew to lock into position
19T 3/4 INCH DUPLEX PINION BORED 30mmF7
BH BJ MOTOR GEARBOX BAUER
BH BJ MOTOR GEARBOX BAUER
Klargester BH BJ Motor Gearbox for BH BJ sewage treatment plant with keyway shaft
Biodisc Adaptor Bracket
Biodisc Adaptor Bracket
This biodisc bracket is manufactured to mount the motor on a B1-B2 Biodisc Sewage Treatment System to convert Panasonic from Stephan motor/gearbox.
Fully Galvanised
6mm mild steel plate
Wieght: 2.79Kg
BIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK
Klargester BB Rotor Pack is a replacement sewage treatment assembly to suit the BB range of Biodisc.
Biodisc Hinge
Biodisc Hinge
Black hinge with 4no 6mm countersunk holes to suit our Kingspan / Klargester Biodisc Sewage treatment plants
Width 50mm
Height 75mm
Depth 4mm
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION
Magnet for Loss of Rotaion Alarm on a BioDisc.
If you need the full kit see below :-
Kingspan Parts Loss of Rotation Kit
BIODISC NYLON BEARING
BIODISC NYLON BEARING
Bearing to suit Klargester BioDisc FA, FB and FC Sewage Treatment Systems.
This bearing has a 25mm internal diameter and a closed off side (as pictured).
For a full set you will need x2,
BIOFICIENT CLP6 SPANNER KEY
BIOFICIENT CLP6 SPANNER KEY
CLP6 Spanner Key
BIOFICIENT IPS MANIFOLD 6PE
BIOFICIENT IPS MANIFOLD 6PE
BIOSAFE KEY
BIOSAFE KEY
Keys used for Biosafe Tanks
Biotec P6-P12 500mm Extension
Biotec P6-P12 500mm Extension
Biotec P6-P12 Sewage treatment extension neck
495mm deep
1875mm diametre
50-50 Spray50% Filled Laminate
Thickness: 7mm
Weight: 33.17 35Kg
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
The Klargester BioTec Distribution Cone is a blue plastic effluent distribution head which is placed on the end of the pipework to diffuse effluent by spraying directly over the media.
Suitable for the Klargester BioTec 1, 2, 3 and 4 sewage treatment systems
BLACK STRAPPING 12MM (PER METRE)
BLACK STRAPPING 12MM (PER METRE)
12mm black polypropylene hand strapping used to hold separator foam filters in place, needing 2no 12mm buckles for each strap
Sold per metre lengths
€9.20 postage will be added at the checkout.
BLOWER HOUSING (COMPLETE)
Plastic Blower Housing - Complete Unit.
Suitable for P006 - P025 BioTec units.
Contains : -
1no x 0701007 - Blower Housing Lid
1no x 0701008 - Blower Housing Base
4no x 0701009 - Blower Housing Clips.
Please note that if you have the old style of blower housing which needs screwed down, you will need to replace it with the new housing unit.
Charles Austen ET100-120 Filter
Charles Austen ET100/ET120 Filter
This filter is suitable for use with the Charles Austen ET100 & ET120 Air Pump.
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
Coalescer Foam Filter - kf020 - 050
Coalescer Foam Filter - kf020 - 050
Klargester Full Retention Separator Foam Filters - kf020-050
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - SEALING-NS80-200 UNITS
COALESCER FOAM FILTER - SEALING-NS80-200 UNITS
Klargester Full Retention Separator Foam Filters - sealing foam to suit ns80-200 unit
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Delta Clearwater Sewage treatment Lid/Cover (900mm)
*2 Week Lead Time From Point of Order*
Delta Lid Galvanised Frame
Delta Lid Galvanised Frame
Fully Galvanised steel frame to suit Delta Main Cover for sewage treatment systems
Diaphragm Kit for Secoh EL-60N
Diaphragm Kit for Secoh EL-60N
The SE60D Diaphragm Kit is suitable for Secoh EL-60N Blowers.
This kit contains:
2x EL diaphragms plus their plastic surrounding frame
4x spacer strips to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Diaphragm Kit for Secoh EL60 / EL80 / EL100
Diaphragm Kit for Secoh EL60 / EL80 / EL100
This Diaphragm Set is suitable for Secoh EL Blowers ( EL 60 / EL80 & EL100)
This kit contains:
2 EL diaphragms plus the plastic surrounding frame & 4 spacer strips to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
The SE24 Diaphragm Kit is suitable for Secoh JDK 60-120 Blowers, including:
JDK-S-60
JDK-60C
JDK-S-80
JDK-80C
JDK-S-100
JDK-100C
JDK-S-120
JDK-120C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part...
DIAPHRAGM SET -JDK 150-500
DIAPHRAGM SET -JDK 150-500
The SE41 Diaphragm Kit is suitable for Secoh JDK 60-120 Blowers, including:
JDK-S-150
JDK-150C
JDK-S-200
JDK-250C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note that the below range requires 2no kits per blower
JDK-S-300
JDK-300C
JDK-S-400
JDK-400C
JDK-S-500
JDK-500C
Note, these...
Diaphragm Set EL150 or EL250
Diaphragm Set EL150 or EL250
This Diaphragm Kit is suitable for Secoh EL (JDK) Blowers.
This kit contains:
2 EL diaphragms plus their plastic surrounding frame & 4 magnetic spacers to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Duplex Chain Link (To Suit BG)
Duplex Chain Link
To Suit BG DUPLEX DRIVE CHAIN
(Remember to use good quality grease to lubricate the chain when required.)
EBARA BEST FOUR M SUMP PUMP
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
Ebara Best One MS Automatic Sump Drainage Water Pump - Float Switch - 230v
The best one MS submersible electric pump is for clean & dirty water, it can be used in multiple applications including draining, garages, basements, cellars, or any other places that are subject to flooding. Also, it can be used to supply water to garden fountains and be used for easy emptying of large tanks and reservoirs....
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
ET-100 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-100 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
ET-120 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-120 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-150 Charles Austen Blower service kit
The ET-150 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-200 Charles Austen Blower
ET-200 Charles Austen Blower
Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture.
...
ET-200 CHARLES AUSTEN BLOWER SERVICE KIT
ET-200 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-200 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
ET-250 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-250 Charles Austen Blower service kit for the includes:-
4 Diaphragms
1 Filter
16 Valves
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
ET-40 CHARLES AUSTEN BLOWER
ET-40 CHARLES AUSTEN BLOWER
The ET40 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features.
Product Features
• Green drive technology - energy efficient motors so low power consumption
• Specially formulated diaphragm material...
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-40 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-60 AO Charles Austen Blower
ET60 AO Charles Austen Blower
The Charles Austen ET60 A is a linear diaphragm air pump with alarm which provides a clean oil free air source.
This 60 litres per minute capacity is suitable for a wide range of applications including
• Septic tank and Sewage Treatment Plant (STP) aeration
• Aquatic oxygenation for fish ponds and aquariums
• Spas / whirlpools
• Water features
...
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
ET-60 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-60 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
Wastewater Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.