Product Ref: 0026400

Free Delivery

Lead times may vary - please check before ordering

€117.11 ex VAT
(€144.05 inc VAT)

Product Description



Most smart immersion heaters are only found in the direct unvented hot water cylinders. That's because they're categorised as water heaters as their only heat source is through the electric immersion heater. A smart immersion heater learns how a household uses its hot water, building up a usage profile unique to the occupiers specific usage patterns.

The smart thermostat fitted to the Kingspan range of direct cylinders leaves the factory in the "Eco Mode" setting. This means that once it's connected to the immersion heater, it will immediately begin to record the hot water usage in the home for a period of seven days. During this time, it maintains a temperature of 70°C, but after that, it automatically adjusts its settings and temperature to be as energy-efficient as possible, based on the needs of the householders.

If a smart immersion heater is used on its "Eco Mode" setting then it can save money when compared to a regular immersion heater. A regular immersion heater will maintain a constant cylinder temperature of between 50°C to 65°C, depending on the temperature selected by the installer or homeowner. If left on 24/7, the electricity bills can mount up and the life of the immersion heater element itself will be shortened. Therefore, it's recommended that a timer switch is also fitted to control when the heater is on.

In contrast, a smart immersion heater should be permanently left on 24/7 in "Eco Mode" setting, as this will predict your demand and adjust water temperature to suit. That means the water is only being heated when needed and to the temperature required, to ensure you have enough hot water to meet your normal demand, giving the potential to save up to 20%. Because the smart immersion heater continually monitors hot water usage, even after the first seven days of installation, it's always adjusting to give the household the most efficient use of electricity.

The installation process for a smart immersion is exactly the same as a standard immersion with no additional complex wiring to deal with.

  • Incoloy long life
  • Thermowatt 3kW
  • 14"
  • 1 3/4" thread fits Tribune HE and Ultrasteel Direct (ERP) models
  • This part is used for stainless unvented Direct, Cylinders
  • Dimensions: Height: 495mm, Width: 90mm, Depth: 90mm, Weight: 0.75kg

Product Specification

  • Product Code: KING
  • Shipping: Free Delivery

Delivery Terms

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required. undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

Returns Information


In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail 

After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.


If you believe that products you have purchased from are defective, please report this immediately to by e-mail or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not Additionally, will not be liable for any claims for consequential damage or loss.