2140L BUNDED DIESEL SKID BASE

Product Description

21400L BUNDED DIESEL SKID BASE

This 950 litre fuel bowser is constructed from a polyethylene inner tank to ensure a clean fuel storage solution, secured in a steel outer bund. The 950 litre fuel bowser is fully U.N. certified for 10 YEARS for the storage and transportation of fuel. This fuel bowser comes with lockable rear door, four lifting points and two fork sockets.

Outer Tank:

3mm Mild Steel
Cylindrical in section
Removable top section
4 lifting eyes on tank corners
Built-in fork truck sockets in base of tank
Stainless steel Hinged rear access door
Fully lockable

Inner Tank:

Constructed from translucent heavy duty polyethylene to prevent rust contamination of the fuel
2" filler with cap
2 No. 1/2" BSP suction & return connections mounted in the top of the inner tank for generator fuel line
Ball Valve in base of the tank to pump
Pressure relief valve in the top of tank
Manual vent valve fitted
Fuel contents visible through tank wall

Pump:

K1 Semi-Rotary hand pump c/w in line 'Y' strainer
15ft of 1" hose c/w trigger nozzle stowed on a bracket
Options available on request: Electric Pump, Petrol Pump, Non Resale Flowmeter

Finish:

Primer
Two top coats, single British Standard colour

Product Specification

Product Code: TENG
Fuel Type: Diesel
Volume: 2140ltr
Weight: 623.000kg
Dimensions: L:2014mm W:1663mm

Delivery Terms

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier.

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request.

Returns Information

ORDER CANCELLATION

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact sales@tanks.ie for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail sales@tanks.ie

After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail sales@tanks.ie or call 051 351325.

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee.
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss.