Best Selling
Grid
List
90 Litre GRP Water Tank - Two Piece Insulated
Two piece 90 Litre GRP Water Tank - Insulated (25 mm) Full WRAS approval
Manufactured to meet BS7491 Parts 1 and 2, using the highest quality GRP materials, ensuring a long service life with minimal maintenance requirements. Grey colour as standard (other RAL or BS colours are available at additional cost). Only materials of the highest quality are used along with a highly efficient manufacturing...
9000L GALVANISED STEEL WATER TANK
9000L GALVANISED STEEL WATER TANK
This 9000 Litres Galvanised Steel Water Tank is a corrugated Galvanized steel water tank designed specifically to hold large quantities of water. The steel is approved to BS2989:1982 and is galvanized with lead free zinc to 275g/m² to EN10142. There is a minimum safety margin of 40% - this means that the structural strength of the tank is capable of holding...
90L One Piece Insulated GRP Water Tank
Please note that these tanks are bespoke tanks made to order and are non-returnable.
Lead times may vary due to the tanks being made to order.
ALTECNIC ERES AUTO BY-PASS VALVE 22MM
ALTECNIC ERES AUTO BY-PASS VALVE 22MM
Angle pattern differential pressure valve automaticaly regulates pressure in seald heating systems
Specification:
Nickel plated brass valves
Adjustment range 0.1 to 0.5 bar
22mm connections
Reduces heating system noise
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
Panasonic pinion wheel is suitable for Klargester B1 to BF treatment systems. Suited for panasonic gearboxes.
PCD - 180mm
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
Come complete with:
1no pump chamber
1no 300 x 200 x 9mm Polypropylene Sheet
1no BA-BB Biodisc IPS Manifold -
Automatic Pump
BC 1/2 Nylon Bearing
BC 1/2 Nylon Bearing
This is a Klargester half bearing to fit the non-drive end of a Klargester BioDisc BC Sewage Treatment System.
30mm wide
BD Metal Top Retaining Plate for Front Bearing
BD Metal Top Retaining Plate for Front Bearing
Used on BD Biodisc
BF BIODISC COVER ASSEMBLY
BF BIODISC COVER ASSEMBLY
BF/BG LOCKING ELEMENT
BF Bottom Pulley Locking Element
This locking element can be used both on the BF and the BG sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
BG BIODISC DUPLEX CHAIN - 2 METRES
BG BIODISC DUPLEX CHAIN - 2 METRES
The BG 3/4" duplex drive chain is suitable for all Klargester BG BioDiscs (2m length)
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
BG-Bottom-Pulley
BG-Bottom-Pulley
This is the bottom pulley required for Klargester BG sewage treatment systems, connecting to the main shaft.
This requires a BG Pulley locking element
BG-TOP PULLEY-BIO DISC
BG-TOP PULLEY-BIO DISC
The BG top pulley is a standard width top pulley suitable to fit the motor shaft on a Klargester BG BioDisc Sewage Treatment Systems.
The BG top pulley comes with a grubscrew to lock into position
19T 3/4 INCH DUPLEX PINION BORED 30mmF7
Biodisc Adaptor Bracket
Biodisc Adaptor Bracket
This biodisc bracket is manufactured to mount the motor on a B1-B2 Biodisc Sewage Treatment System to convert Panasonic from Stephan motor/gearbox.
Fully Galvanised
6mm mild steel plate
Wieght: 2.79Kg
BIOFICIENT IPS MANIFOLD 6PE
BIOFICIENT IPS MANIFOLD 6PE
BIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tapt
Calpeda Meta Small Variable Speed Booster Twin Pump
Calpeda Meta Variable Speed Booster Twin Pump
This pressure boosting pump is a self priming booster set with a built-in frequency converter. The Meta booster pump is a plug and play solution with the booster pump equipped with an integrated pressure transducer, an integrated check valve and a built-in pressure vessel. The VSD controls the start and stop of the pump and allows to keep a constant...
CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX
10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. ( Product Ref: 0012363 )
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR
8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox.
This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
Charles Austen ET100-120 Filter
Charles Austen ET100/ET120 Filter
This filter is suitable for use with the Charles Austen ET100 & ET120 Air Pump.
Your inlet filter should be washed out every 6 months and replaced every year. Failing to do so can reduce the pumps flow up to 30% and cause possible overheating.
Note, these can not be returned once opened. Please make sure its the correct kit for your blower.
Charles Austen ET30
The ET30 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features
Product Features
Green drive technology - energy efficient motors so low power consumption
Specially formulated diaphragm material for extended life
Due...
Coalescer Foam Filter - kf020 - 050
Coalescer Foam Filter - kf020 - 050
Klargester Full Retention Separator Foam Filters - kf020-050
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS003-NS015 (A)
COALESCER FOAM FILTER - NS003-NS015 (A)
Klargester Full Retention Separator Foam Filters - ns003-ns015 ( A 340mm)
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS003-NS015 (B)
COALESCER FOAM FILTER - NS003-NS015 (B)
Klargester Full Retention Separator Foam Filters - ns003-ns015 ( B 560mm)
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS010-018
COALESCER FOAM FILTER - NS010-018
Klargester Full Retention Separator Foam Filters - ns010-018
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NS3-6
COALESCER FOAM FILTER - NS3-6
Klargester Full Retention Separator Foam Filters - ns3-6
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Coalescer Foam Filter - nsbd 165x80x550
Coalescer Foam Filter For Sale
COALESCER FOAM FILTER - NSBD018
COALESCER FOAM FILTER - NSBD018
Klargester Full Retention Separator Foam Filters - nsbd018
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber.
COALESCER FOAM FILTER - NSBD024-36
COALESCER FOAM FILTER - NSBD024-36
Klargester Full Retention Separator Foam Filters - nsbd024-36
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
COALESCER FOAM FILTER - NSBE025 - NSBE030
COALESCER FOAM FILTER - NSBE025 - NSBE030
Klargester Full Retention Separator Foam Filters - nsbe025 - nsbe030
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Dims: 255 x 80 x 550 mm
COALESCER FOAM FILTER - NSFP003-006
COALESCER FOAM FILTER - NSFP003-006
Klargester Full Retention Separator Foam Filters - nsfp003 and nsfp006 - FOAM Ø250 X 350 X 100 30/20PPI
Clean regularly and replace when required this will help with efficiency of the tank
To identify the type of filter you need, information should be on the inside of the neck of the chamber
Delta Lid Galvanised Frame
Delta Lid Galvanised Frame
Fully Galvanised steel frame to suit Delta Main Cover for sewage treatment systems
Duplex Chain Link (To Suit BG)
Duplex Chain Link
To Suit BG DUPLEX DRIVE CHAIN
(Remember to use good quality grease to lubricate the chain when required.)
Extension Neck (Alpha Tank)
Extension Neck (Alpha Tank)
Spetic Tank Extension to suit Alpha range (2800-3600Litre tank)
This 460mm diametre tank extension with clear plastic sleeve and flanged base.
Falcon Street Light 101
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
Falcon Street Light 102
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
Falcon Street Light 103
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
Falcon Street Light 201
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
Falcon Street Light 202
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
Falcon Street Light 203
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
Falcon Street Light 204
Price is ex-works from Co. Dublin. Transportation to site can be arranged for an additional fee
FPZ R30-MD Side Channel Blower
FPZ R30-MD Side Channel Blower
The R30-MD FPZ Side Channel Blower is a single impellor “double stage” blower which supersedes the SCL-DH 30 model. A double stage impellor is mounted directly onto the motor shaft for contact-free compression. This blower has a robust aluminium construction.
Product characteristics
1Phase Power
Noise Level: 69.2-72.8 dB
Energy efficient motors...
FRESH HYDRO HOT WATER UNIT
FRESH HYDRO HOT WATER UNIT
ESBE Fresh Hydro Units stands for outstanding performance in potable water installations. It is a modern and efficient way of potable water heating. The Fresh Hydro Hot Water Unit is designed for potable water applications. Equipped with unique hydro block, quick mixing actuator, two pass plate heat exchangers and intelligent controller the FSK100 series are one of a kind....