• display as grid Grid
  • display as list List

BOTTOM IMMERSION HEATER ASSEMBLY (DIRECT)
BOTTOM IMMERSION HEATER ASSEMBLY (DIRECT)
BOTTOM IMMERSION HEATER ASSEMBLY (DIRECT) HeatStream tanks come with minimum 3KW immersion heater. Direct range comes with 2 immersion heaters – one at the top and one at the bottom Each immersion heater comes with a high limit safety thermostat.
€70.97 ex VAT
(€87.29 inc VAT)
FILLING LOOP
FILLING LOOP
FILLING LOOP A filling loop essentially fills the tank with water. All HeatStream units come with a filling loop and caps. If the water goes below the ‘MIN’ marking, it can be topped up using the filling loop. The filling loop should be disconnected when not in use.
€56.77 ex VAT
(€69.83 inc VAT)

IMMERSION THERMOSTAT
IMMERSION THERMOSTAT
IMMERSION THERMOSTAT
€40.00 ex VAT
(€49.20 inc VAT)
MIXER VALVE
MIXER VALVE
MIXER VALVE All HeatStream units are supplied with a 3/4 inch BSP Thermostatic Mixing Valve. It has an adjustment range of between 35 degrees C (Min) and 65 degrees C (Max). Its function is to deliver water consistently at a safe temperature. It should be set to nominally 45 degrees C to achieve best hot water output performance.
€85.16 ex VAT
(€104.75 inc VAT)

MIXING VALVE PIPESET
MIXING VALVE PIPESET
MIXING VALVE PIPESET
€40.00 ex VAT
(€49.20 inc VAT)
SOLAR PROBE SENSOR POCKET ASSEMBLY
SOLAR PROBE SENSOR POCKET ASSEMBLY
SOLAR PROBE SENSOR POCKET ASSEMBLY HeatStream Twin Systems come with a solar probe. Solar probe works like a temperature sensor that can measure the temperature. It is fitted into a temperature probe sensor pocket. The pocket can accommodate a temperature sensor with maximum diameter of 8mm.
€56.77 ex VAT
(€69.83 inc VAT)

TANK THERMOSTAT
TANK THERMOSTAT
TANK THERMOSTAT
€55.48 ex VAT
(€68.24 inc VAT)
TOP IMMERSION HEATER ASSEMBLY
TOP IMMERSION HEATER ASSEMBLY
TOP IMMERSION HEATER ASSEMBLY HeatStream tanks come with minimum 3KW immersion heater. Direct range comes with 2 immersion heaters – one at the top and one at the bottom Each immersion heater comes with a high limit safety thermostat.
€70.97 ex VAT
(€87.29 inc VAT)

12L EXTERNAL EXPANSION VESSEL
12L EXTERNAL EXPANSION VESSEL
12L EXTERNAL EXPANSION VESSEL This pressure vessel is food-grade and suitable for potable water. It has a replaceable membrane and is ideal for modern installations. 12 litre vessel For direct 150L Units
€80.21 ex VAT
(€98.66 inc VAT)
18L EXTERNAL EXPANSION VESSEL
18L EXTERNAL EXPANSION VESSEL
18L EXTERNAL EXPANSION VESSEL This pressure vessel is food-grade and suitable for potable water. It has a replaceable membrane and is ideal for modern installations. 18 litre vessel For direct 180, 210 &250L Units
€85.03 ex VAT
(€104.59 inc VAT)

24L EXTERNAL EXPANSION VESSEL
24L EXTERNAL EXPANSION VESSEL
24L EXTERNAL EXPANSION VESSEL This pressure vessel is food-grade and suitable for potable water. It has a replaceable membrane and is ideal for modern installations. 24 litre vessel For direct 300L Units
€99.58 ex VAT
(€122.48 inc VAT)
15mm FILLING LOOP
15mm FILLING LOOP
15mm FILLING LOOP 15mm compression connection
€41.44 ex VAT
(€50.97 inc VAT)

ACETAL TUNDISH
ACETAL TUNDISH
ACETAL TUNDISH 15 x 22mm
€15.12 ex VAT
(€18.60 inc VAT)
IMMERSION HEATER
IMMERSION HEATER
IMMERSION HEATER Incoloy long life Thermowatt 3kW 14" Not suitable for Copper Cylinders Suitable for Ultrasteel Cylinders
€80.21 ex VAT
(€98.66 inc VAT)

SMART IMMERSION HEATER
SMART IMMERSION HEATER
SMART IMMERSION HEATER Most smart immersion heaters are only found in the direct unvented hot water cylinders. That's because they're categorised as water heaters as their only heat source is through the electric immersion heater. A smart immersion heater learns how a household uses its hot water, building up a usage profile unique to the occupiers specific usage patterns. The smart...
€109.29 ex VAT
(€134.43 inc VAT)
TEMPERATURE & PRESSURE RELIEF VALVE
TEMPERATURE & PRESSURE RELIEF VALVE
TEMPERATURE AND PRESSURE RELIEF VALVE 1/2" NPT X 15mm 7 bar pressure 90 deg C
€60.81 ex VAT
(€74.80 inc VAT)