Featured Products
EBARA BEST FOUR M SUMP PUMP
(€923.21 inc VAT)
EBARA BEST FOUR M SUMP PUMP
The Ebara Best Four Manual Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per standard
Corrosion...
€750.58 ex VAT (€923.21 inc VAT)
ET-60 AO Charles Austen Blower
(€164.23 inc VAT)
ET60 AO Charles Austen Blower
The Charles Austen ET60 A is a linear diaphragm air pump with alarm which provides a clean oil free air source.
This 60 litres per minute capacity is suitable for a wide range of applications including
• Septic tank and Sewage Treatment Plant (STP) aeration
• Aquatic oxygenation for fish ponds and aquariums
• Spas / whirlpools
• Water features
...
€133.52 ex VAT (€164.23 inc VAT)
Smart Control Panel & Beacon Combo
(€491.94 inc VAT)
Treatment Tank Control Panel (Smart Range)
This New Style Klargester Control Panel for waste water tanks with digital display continuously monitors the internal timetables and operates the appropriate pump/motor outputs according to a timetable entry. The status is shown on the display. The current time continues to be updated internally by battery backup when the mains fail, and the control...
€482.89 €399.95 ex VAT (€491.94 inc VAT)
Grid
List
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER)
This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units.
Supply: 230V/50Hz/1PH
Output power: 0.180 kW
Output torque: 280 Nm
Output speed: 6.1 rpm
BG BIODISC DUPLEX CHAIN - 2 METRES
BG BIODISC DUPLEX CHAIN - 2 METRES
The BG 3/4" duplex drive chain is suitable for all Klargester BG BioDiscs (2m length)
BF Motor/Gearbox (Bauer)
BF Motor/Gearbox (Bauer)
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units.
Bauer 2000 Series helical geared motor
Supply:
230V/50Hz/1PH
Output power
0.120 kW
Output torque
136 Nm
Output speed
8.3 rpm
Terminal box mounting
B3
Terminal box position
I/A
Terminal...
BIODISC BA/BB BEARING KIT
BIODISC BA/BB BEARING KIT
Full BA-BB BioDisc Bearing Replacement Kit.
INCLUDES :
0600038 - 1/2 Nylon Drive End Bearing
0600079 - Whole Drive End Bearing
0600039 - Retaining Plate
0303328 - Bearring Retaining Plate
0303464 - Metal Backing Plate
BIODISC BA/BB BEARING RETAINING PLATE
BIODISC BA/BB BEARING RETAINING PLATE
Half nylon bearing retaining plate for non-drive end on Klargester BioDisc BA/BB/BAX units.
BIODISC BA/BB EXTERNAL MOTOR CAPACITOR KIT
BIODISC BA/BB EXTERNAL MOTOR CAPACITOR KIT
The Klargester sewage treatment system BA/BA-X/BB BioDisc external Motor Capacitor Kit is suitable for the Klargester BA/BB BioDisc sewage treatment systems. The Kit is to be used alongside the post October 2007 green control panel.
This has a capacitor housed inside, so if you purchase a new Panasonic Motor/gearbox and you do not have a capacitor...
BIODISC BA/BB PULLEY LOCKING ELEMENT
BIODISC BA/BB PULLEY LOCKING ELEMENT
BA/BB Pulley locking element
BIODISC BA/BB NYLON HALF BEARING
BIODISC BA/BB NYLON HALF BEARING
Klargester half bearing to fit the non-drive end of a Klargester BioDisc BA/BB Sewage Treatment System.
BIODISC BA/BB SEWAGE TREATMENT PLANT TOP PULLEY
BIODISC BA/BB SEWAGE TREATMENT PLANT TOP PULLEY
Top pulley to suit Klargester BA, BB BioDisc Sewage Treatment Systems.
BIODISC BA/BB WHOLE BEARING
BIODISC BA/BB WHOLE BEARING
A complete, one piece nylon bearing to suit the drive end of the Klargester BioDisc Ba, BA-X and BB Sewage Treatment Plants.
BC Top Pulley for Sewage Treatment Plant
Top Pulley for BC BioDisc Sewage Treatment Plant
Top Pulley suitable for the motor shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant
24 Teeth
8mm Pitch
H7 Tolerence
30mm Wide High Torque Drive Pulley
Bored 18mm
6mm Grubscrew hole above keyway centrally in tooth Face
6mm Grubscrew Supplied
British Standard Keyway
BA/BB BioDisc Bottom Pulley
BA/BB BioDisc Bottom Pulley
Bottom pulley to suit the Klargester BA, BA-X and BB BioDisc Sewage Treatment Systems.
Bottom Pulley suitable for the shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant
80 Teeth
8mm Pitch
20mm Wide High Torque Drive Pulley
Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when...
Biodisc Hinge
Biodisc Hinge
Black hinge with 4no 6mm countersunk holes to suit our Kingspan / Klargester Biodisc Sewage treatment plants
Width 50mm
Height 75mm
Depth 4mm
BIODISC DRIVE ASSEMBLY FOR BA/BB (post 2006 tanks)
BIODISC DRIVE ASSEMBLY FOR BA/BB (post 2006 tanks)
This is for the Post 2006 Models of the BA/BB Bio Disc. This is a basic drive assembly kit which includes the motor, capacitor belt & top pulley. If you also require the bottom pulley & locking element along with all these parts see below link :-
Kingspan Parts BA-BB BioDisc Drive Assembly Kit 3 (Post 2006 models)
The BA-BB Bio Disc...
BIODISC DRIVE ASSEMBLY FOR BA/BB (pre 2006 tanks)
BIODISC DRIVE ASSEMBLY FOR BA/BB (pre 2006 tanks)
Klargester Biodisc Sewage Treatment Plant motor / gearbox drive assembly for tanks brought before 2006, where the motor is placed high to the left, inside the tank.
Includes:
Motor/ Gearbox (0015500)
Long 1600mm Belt (0010787)
Top Pulley (0013725)
BIODISC BA-BB DRIVE ASSEMBLY (POST 2006 MODELS) KIT 3
BIODISC BA-BB DRIVE ASSEMBLY (POST 2006 MODELS) KIT 3
This is for the Post 2006 Models of the BA/BB Bio Disc. This is a full drive assemlbly replacement kit including the motor, capacitor, belt, both pulleys & locking element.
The BA-BB Bio Disc Drive Assembly Kit 3 includes :-
x1 Panasonic Motor-Gearbox - 0015500
x1 Short 1120mm Belt - 0012828
x1 Top Pulley - 0013725
x1 Bottom...
BIODISC DRIVE ASSEMBLY KIT 4 FOR BA-BB (PRE 2006 MODELS)
BIODISC DRIVE ASSEMBLY KIT 4 FOR BA-BB (PRE 2006 MODELS)
This is for the Pre 2006 Models of the BA/BB Bio Disc. This is a full drive assemlbly replacement kit including the motor, capacitor, belt, both pulleys & locking element.
The BA-BB Bio Disc Drive Assembly Kit 4 includes :-
1 x Panasonic Motor-Gearbox - 0015500
1 x Long 1600mm Belt - 0012828
1 x Top Pulley - 0013725
1 x...
ENKAMAT NETTING (1M)
Enkamat Netting
Enkamat netting is to be used on the media bale in the Sewage Treatment Plants to prevent large contaminants from getting into the media core.
2m is recommended to replace existing Enkamat
Thickness: Approx. 10mm
Greasomatic Cartridge (Multi Purpose)
Greasomatic Cartridge (Multi Purpose)
This is a pre-charged autogreaser which screws into a grease nipple socket or additional lubrication point and discharge 120ml of lubricant in a controlled continuous flow. It is one of the most effective alternatives to manual lubrication.
The grease cartridge has 7 different settings allowing you to set effiently depending on your application. Operates...
Grease Cartridge (Chain Type)
Grease Cartridge (Chain Type)
This is a pre-charged autogreaser which fits onto the chain guard to supply grease to the drive chain on BioDisc units BD, BE and BF. It is one of the most effective alternatives to manual lubrication.
The grease cartridge has 7 different settings allowing you to set effiently depending on your application. Operates under a wide temperature range and can be installed...
BIODISC PERIPHERAL DRIVE ROLLER KIT
BIODISC PERIPHERAL DRIVE ROLLER KIT
This complete set of 12 peripheral drive rollers including nuts, bolts and washers, can be used in conjunction with the Klargester biodisc FA, FB and FC Sewage Treatment Systems.
BA COVER (BIODISC)
BA COVER (BIODISC)
Cover/Lid for Biodisc BA-BB-BAX comes complete with 2 x Locks.
Materials: Glass Reinforced Plastic (GRP) with a cloloured Gel Coat Weather Exterior.
BIODISC / BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
BIODISC/ BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
Suitable to fit all BioTec unit lids and P006-P012 BioTec and also suit the BA BioDisc systems.
Please note 2 cover locks are required to secure the lids.
BIODISC LOSS OF ROTATION KIT
BIODISC LOSS OF ROTATION KIT
The Klargester (Kingspan) loss of rotation alarm is suitable for all Klargester gravity BioDiscs. This kit will help you to identify if the discs are failing to rotate and then determine if you need to arrange servicing of your BioDisc system.
BIOFICIENT CLP6 SPANNER KEY
BIOFICIENT CLP6 SPANNER KEY
CLP6 Spanner Key
Blower Box Cover
BIOTEC BLOWER COVER BOX
BLOWER HOUSING (COMPLETE)
Plastic Blower Housing - Complete Unit.
Suitable for P006 - P025 BioTec units.
Contains : -
1no x 0701007 - Blower Housing Lid
1no x 0701008 - Blower Housing Base
4no x 0701009 - Blower Housing Clips.
Please note that if you have the old style of blower housing which needs screwed down, you will need to replace it with the new housing unit.
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
BIOTEC P6 SCREEN ASSEMBLY
BIOTEC P6 SCREEN ASSEMBLY
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tapt
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
The Klargester BioTec Distribution Cone is a blue plastic effluent distribution head which is placed on the end of the pipework to diffuse effluent by spraying directly over the media.
Suitable for the Klargester BioTec 1, 2, 3 and 4 sewage treatment systems
BIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY
1no Airlift Baffle
2no Scum Baffles
8no Rivet Tapt
BIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA
Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media.
The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
BIOSAFE KEY
BIOSAFE KEY
Keys used for Biosafe Tanks
BH BJ MOTOR GEARBOX BAUER
BH BJ MOTOR GEARBOX BAUER
Klargester BH BJ Motor Gearbox for BH BJ sewage treatment plant with keyway shaft
BLOWER HOUSING BASE
BLOWER HOUSING BASE
Base for blower housing - this base is only suitable for the version of the blower housing which clips down. If you have a screw down base you will need a new blower housing complete.
Dimensions are in the technical drawings.
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
If you need a full set of clips, order x4 clips.
These clips match the blower housing on the below link : -
Kingspan Parts Blower Housing (Complete)
BRUSH FITMENT
Brush Fitment
Brush Fitment for BD to BG Grease Kits
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR
8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox.
This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX
10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor
This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. ( Product Ref: 0012363 )
Charles Austen Envirosure 100 Low Pressure Alarm
Charles Austen Envirosure 100 Low Pressure Alarm
Perfect for detecting if a blower in a sewage system is failing
Detects aeration pump failures or power cuts immediately
Compact, lightweight , low power consumption, minimal running costs
Multiple variants – options include bright LED beacon, plug-in or hardwire
Versatile installation – installs in minutes with quick fit...
Diaphragm Set EL150 or EL250
Diaphragm Set EL150 or EL250
This Diaphragm Kit is suitable for Secoh EL (JDK) Blowers.
This kit contains:
2 EL diaphragms plus their plastic surrounding frame & 4 magnetic spacers to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
DIAPHRAGM KIT FOR SECOH JDK 60 - 120
The SE24 Diaphragm Kit is suitable for Secoh JDK 60-120 Blowers, including:
JDK-S-60
JDK-60C
JDK-S-80
JDK-80C
JDK-S-100
JDK-100C
JDK-S-120
JDK-120C
The kit contains:
2x JDK diaphragms, plus their plastic surrounding frame
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part...
Diaphragm Kit for Secoh EL60 / EL80 / EL100
Diaphragm Kit for Secoh EL60 / EL80 / EL100
This Diaphragm Set is suitable for Secoh EL Blowers ( EL 60 / EL80 & EL100)
This kit contains:
2 EL diaphragms plus the plastic surrounding frame & 4 spacer strips to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
Diaphragm Kit for Secoh EL-60N
Diaphragm Kit for Secoh EL-60N
The SE60D Diaphragm Kit is suitable for Secoh EL-60N Blowers.
This kit contains:
2x EL diaphragms plus their plastic surrounding frame
4x spacer strips to help with reassembly
Note, these can not be returned once opened. Please check out the Spare Parts Guide for the correct part for your blower
DRY GUARD BA/BB/BC BIODISC
DRY GUARD BA/BB/BC BIODISC
The dry guard fits to the gearbox support beam and protects the pulley system from water ingress.
Suits BA ,BB & BC BioDisc's
Ebara Optima Automatic Submersible Pump
Ebara Optima Automatic Submersible Pump
The Ebara Optima Automatic Submersible pump can be used for various domestic applications including draining wells, garages, cellars or places that are subject to flooding.
It can also be used for movement of seepage water or draining of unfoul wastewater as well as irrigation of gardens.
Technical Details
Equipped with mechanical seal as per...
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
ET-40 CHARLES AUSTEN BLOWER SERVICE KIT
The ET-40 Charles Austen Blower service kit for the includes:-
2 diaphragms
1 filter
1 magnet
Charles Austen reccommend your ET pump be service every 18 months.
ET-60 CHARLES AUSTEN BLOWER
ET-60 CHARLES AUSTEN BLOWER
The Charles Austen ET60 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications Include:
Sewage aeration
Aquatic oxygenation
Spas / whirlpools
Water features
Product Features:
Air flow rate - 60.0 l/min (0.12 bar)
Max Pressure: 0.17 Bar
Connector Size: 18mm
Green...
Sewage Treatment Plant Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.