ULTRASTEEL 210L INDIRECT SOLAR HOT WATER CYLINDER

ULTRASTEEL 210L INDIRECT SOLAR HOT WATER CYLINDER

Product Ref: 0004496/ AUSN210IEERP

Cylindrical Free Delivery

available Available

updown
from €806.40 ex VAT
(€991.87 inc VAT)
Product Description

ULTRASTEEL 210L INDIRECT SOLAR HOT WATER CYLINDER

 

Ultrasteel cylinders deliver high flow rates and mains pressure hot water (regulated up to 3 bar) for powerful showers and the fast filling of baths or sinks, making them ideal for homes with multiple bathrooms or extra utility rooms. Manufactured from high-grade engineering materials, such as 'Duplex' stainless steel for superior corrosion resistance, these Ultrasteel hot water cylinders strike the perfect balance for installers and homeowners between reliability, aesthetics and good value.
Quick recovery coils mean homeowners have low reheat times for the fast availability of hot water. High flow rates are perfect for multiple bathrooms. The energy efficient insulation keeps running costs low.

Indirect solar cylinders have been specifically designed for use with solar thermal energy as a primary source of heat. In addition to purpose-designed coil-in-coil heat exchanger, which allows for maximum transfer of renewables heat into the stored water, the cylinders come with a secondary coil for use with traditional gas or oil boiler and a 3kW backup immersion heater, which can act as a boost.
 

Benefits:


  • 50mm CFC & HCFC-free foam insulation for low heat loss
  • Economical to run with minimal maintenance and no hidden costs
  • Factory fitted temperature & pressure relief valve
  • 22mm compression connections
  • High quality inlet control set with balanced cold

 

Optional Cylinder Kits includes:


  • Inlet Control Set
  • Temperature & pressure relief valve
  • 15mm/22mm Tundish
  • 18 Litre expansion vessel
  • Two port valve
  • Dual thermostat

 

If you would like more information on choosing the correct hot water cylinder for your needs please click the following link - Choosing The Correct Hot Water Cylinder

Delivery Terms

Kingspan Tanks - Tail-lift deliveries are available for most tanks up to 2,000 Litre capacities for kerbside delivery.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Klargester Tanks  - All tanks are delivered on 45ft Flat-bed Articulated Trailers, so off-loading equipment on site is necessary.
HIAB off-loading is available at extra cost, if requested.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

Harlequin Tanks  - Tail-lift deliveries are available for most tanks up to 2,500 Litre capacities for kerbside delivery subject to availability.
It is the responsibility of the customer to inform us, if off-loading equipment is required.

tanks.ie undertakes to attempt to fulfill all orders within a maximum of 7 working days of order acceptance, unless advised otherwise. In the event that any order is delayed, tanks.ie will not be responsible for any consequential loss or damage that this delay may cause.

Smaller items (including most accessories and consumables) will normally be despatched by courier.
Larger items (including all storage tanks) will normally be delivered by carrier. 

Please note that for all items delivered by carrier, normally a truck + 40ft trailer, it is the customer's responsibility to ensure adequate vehicular access and to provide suitable offloading equipment, where required. Please notify us, if this might pose a problem and we will endeavour to facilitate your request. 

Returns Information

ORDER CANCELLATION 

In accordance with Irish and European Union consumer laws, you have seven days after receipt of order to cancel the order in its entirety or any part thereof, providing the goods are in a re-saleable condition. Should you wish to cancel any order, you must first contact [email protected] for a ‘Returns Authorisation Number’.

Please call 051 351325 or e-mail [email protected] 


After the Returns Authorisation Number has been issued, we will make arrangements with you for the goods to be returned. If you wish tanks.ie to arrange the collection of the goods, please note that a carriage and administration charge will apply, which will not exceed 35% of the gross value of the goods.

Upon return of the cancelled goods to tanks.ie and verification that they are in a re-saleable condition, we will refund the value of the goods, less any collection and administration charges, within 28 days.

DEFECTIVE PRODUCTS 

If you believe that products you have purchased from tanks.ie are defective, please report this immediately to tanks.ie by e-mail [email protected] or call 051 351325. 

If they are within the manufacturer’s guarantee period, we will arrange with the manufacturer to replace or repair the goods at the manufacturer’s discretion and consistent with their guarantee. 
Where it is necessary to inspect the goods on site and an inspection proves the fault is neither the fault of tanks.ie, nor the product manufacturer, an inspection charge will apply, which will be advised by the manufacturer prior to site inspection.

Please note that where guarantees are available in excess of those required by law, these are provided at the discretion of the product manufacturer and not tanks.ie. Additionally, tanks.ie will not be liable for any claims for consequential damage or loss. 

Product Specification

  • Product Code: KING
  • Shape: Cylindrical
  • Shipping: Free Delivery
  • Volume: 210ltr
  • Weight: 65.000kg
  • Dimensions: H:1496mm
  • Diameter: 550mm

People who bought this also bought...

ULTRASTEEL 250L INDIRECT SOLAR HOT WATER CYLINDERULTRASTEEL 250L INDIRECT SOLAR HOT WATER CYLINDER
ULTRASTEEL 250L INDIRECT SOLAR HOT WATER CYLINDER
from €841.44 ex VAT
(€1,034.97 inc VAT)