Which Klargester Fuel and Oil Separator Do I Need?

Klargester Fuel and Oil Separator

Klargester's range of fuel and oil separators, designed and manufactured in Ireland, ensure high performance across a range of applications. Surface water drains normally discharge to a watercourse or indirectly into underground waters via a soakaway. Contamination of surface water by oil, chemicals or suspended solids can cause these discharges to have a serious impact on the ground water. Oil separators are installed on surface water drainage systems to protect receiving waters from pollution by oil, due to minor leaks from vehicles and plant.

Separators are used in many applications such as:

  • Garage Forecourts
  • Car Parks
  • Workshops
  • Supermarket / Shopping Centres
  • Distribution Warehouses
  • Car Wash Bays
  • Scrap Yards
  • Car Garages
  • Fuel Storage Sites
  • Distribution/Haulage Centres
  • Waste Transfer Sites
  • Business/Commercial Parks/Industrial Estate

 

Full Retention Separators:

Klargester full retention separators have been designed for use in high-risk areas, such as roadways, fuel depots and car parks. These separators treat the full flow of surface water in these areas and offer a reliable oil and silt separating solution.

Product Highlights

  • Can treat the equivalent flow of 65mm/hr rainfall 
  • This full retention interceptor unit is available in over 20 different specifications 
  • Designed for easy installation, saving you time and money 
  • Third-party certified to EN858 - 1 for peace of mind 
  • Fitted inlet/outlet connections
  • Vent points within necks 
  • Maintenance from ground level 
  • GRP - PE Model construction - high strength and durability 
  • CE-marked 

To see our full range of Full Retention Separators please click here.

 

Bypass Separators:

Klargester bypass separators are used when it is considered an acceptable risk to not provide full treatment for very high flows, such as, where the risk of a large spillage and heavy rainfall occurring at the same time is small. Typical applications include surface carparks, roadways and lightly contaminated commercial areas.

 

Product Highlights

  • Engineered to achieve a concentration of less than 5mg per litre
  • Treats the ‘first flush’, which is approximately 10% of the peak flow
  • Can be maintained from ground level
  • Light and easy to install, saving you time and money
  • GRP or rotomoulded construction (subject to model)
  • Inclusive of silt storage volume
  • Fitted inlet/outlet connectors
  • Vent points within necks
  • Extension access shafts for deep inverts
  • CE-marked

To see our full range of Bypass Separators please click here.

 

Forecourt Separators:

Klargester Petrol Forecourt Separators are designed to handle potential spillages from refuelling and delivery. All models comply with safety and environmental requirements.

Product Highlights

  • Can be fitted to existing tanks on your site or forecourt 
  • Light and easy to install, saving you time and money 
  • Inclusive of silt storage volume 
  • Fitted inlet/outlet connectors 
  • Vent points within necks
  • Extension access shafts for deep inverts 
  • Maintenance from ground level 
  • Oil storage volume 
  • Coalescer  
  • Automatic closure device 

To see our Forecourt Separators click here

 

Washdown Separators and Silt Traps:

Designed for use in car washes and other cleaning facilities, the wastewater passes through our Kingspan Klargester washdown and silt traps where it is retained long enough to allow solids to sink to the bottom and remain in the tank.

Product Highlights

  • Light and easy to install
  • Maintenance from ground level
  • Manufactured from durable, rot and corrosion-proof glass reinforced polyester

To see our full range of Washdown Separators and Silt Traps click here.



W1-010 WASHDOWN SEPARATOR
from €1,070.00 ex VAT
(€1,316.10 inc VAT)
FORECOURT SEPARATORFORECOURT SEPARATOR
from €4,291.00 ex VAT
(€5,277.93 inc VAT)

BYPASS SEPARATOR NSBP4
from €1,131.00 ex VAT
(€1,391.13 inc VAT)
BYPASS SEPARATOR NSBP6
from €1,235.00 ex VAT
(€1,519.05 inc VAT)

FULL RETENTION SEPARATOR NSFP6
from €1,324.00 ex VAT
(€1,628.52 inc VAT)
FULL RETENTION SEPARATOR NSFP3
from €1,096.00 ex VAT
(€1,348.08 inc VAT)