Featured Products
P6-P12 BIOTEC SEWAGE TREATMENT COMPLETE COVER
Klargester BioTec Sewage Treatment Complete Cover P6-P12
Complete inner and outer lid for Biotec Sewage treatment systems P6-P12 Only
Made from High grade Glass Reinforced Plastic (GRP)
Green Powdercoated protective layer
Complete with Locks
Seal not required
If a stong effluient smell is coming from the tank, the tank needs inspected
€POA
GRP Kit / Fibreglass Repair Kit (2m)
(€145.62 inc VAT)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
€118.39 ex VAT (€145.62 inc VAT)
ET-40 CHARLES AUSTEN BLOWER
(€118.62 inc VAT)
ET-40 CHARLES AUSTEN BLOWER
The ET40 is a linear diaphragm air pump which provides a clean, oil free air source and is ideally suited for outdoor (rainproof) use.
Applications:
Sewage Aeration
Aquatic Oxygenation
Spas / Whirlpools
Water Features.
Product Features
• Green drive technology - energy efficient motors so low power consumption
• Specially formulated diaphragm material...
€96.44 ex VAT (€118.62 inc VAT)
Grid
List
SQUARE DRAINAGE BOX WITH GRATE
SQUARE DRAINAGE BOX WITH GRATE
These square drainage sump boxes come complete with either a black or green grate. It is supplied with two seals that accept 2″, 3″, 4″ pipe and corrugated pipe. You can fit addition pipe and choose the height. It can be used for up to four pipe connection.
Comes in two sizes - 9" and 12"
Grate comes in two colour options - black...
WALL SEAL
Wall Seals
Wall seals are used for the connection of pipes into manholes, concrete road gullies, catch pits, pre-formed sectional chambers, and other pre-cast structures as well as laterals to pipelines
Wall seals are particularly well suited to pre-cast structures or the post-fitting of pipes. Wall Seals allow for angular and lateral misalignment of the pipes and provide an effective seal against...
20mm x 3/4 BSP Female Adapter
3/4 BSP FEMALE ADAPTER X 20MM
This adapter can be used for flexible hoses and suction pipes.
The adaper coverts the hose to a BSP thread so that it can be attached to pumps, tank and equipment.
The size refers to the inside diameter of the pipe
3 POLE ISOLATOR SWITCH
3 POLE ISOLATOR SWITCH
3 Pole Non Fused lockable Isolator Switch with high impact grey polycarbonate enclosure, UV stabilised to IP66/67, Complete with 1no fuse block
3/4' HOSE CLEAR BRAIDED per metre
3/4'' HOSE CLEAR BRAIDED per metre
3/4'' Clear Braided hose which can be used to connect airlift to manifold within BioTec P40 and Airflow AF5 upwards.
3/4' Hose Joiners
3/4" Hose Joiners
3/4" Hose Joiners used in P018-25 BioTec
Materials: Blue Tefen Plastic
COMPACT UV EFFLUENT FILTER
COMPACT UV EFFLUENT FILTER
The Compact UV Effluent Filter is designed with an integrated effluent filter to protect the UV lamp from excess solids. It reduces bacteria levels from secondary effluent. Every component of the compact effluent filter is engineered and constructed to provide reliable disinfection and superior operational life. UV disinfection is routinely used in ecological sensitive...
Green panel beacon and adaptor
Green panel beacon and adaptor
This adapter allows customers to use the oldstyle green control panel but with the new 6 volt beacon.
GRP KIOSK - SINGLE DOOR
GRP KIOSK - SINGLE DOOR
These Glass Reinforced Kiosks come complete with vents on both sides. Suitable to sewage treatment tanks, pumps, and electrical equipment.
Weatherproof black gasket neoprene and 12mm plywood mounting backboards are fitted as standard.
Doors are reinforced to provide a high level of security and are dust proof and weather proof.
Hign Quality handmade products
Stainless...
GRP Kit / Fibreglass Repair Kit (2m)
GRP Kit / Fibreglass Repair Kit (2m)
The comprehensive GRP Fibreglass kits are supplied complete with all the materials needed to repair or bond GRP neck extensions.
The kit will cover 2 metres area with 1no layer of 450gm Fibreglass Matting. Catalyst is included for the resin.
The Resin included is a general-purpose resin that can be used for all types of all types of moulding including,...
HOSE TAIL ELBOW (1/2 BSP 12MM)
Hose Tail Elbow
Hose tail Elbow for Biotec Airlift unit's.
Materials: Blue Tefen Plastic
(1/2 BSP - 12mm)
HOSE TAIL ELBOW (3/4 BSP 19MM)
HOSE TAIL ELBOW (3/4 BSP 19MM)
3/4 Hosetail Elbow for BIOTEC airlift unit's for P018-25
IN-LINE PRESSURE FILTER
IN-LINE PRESSURE FILTER
The Inline pressure filter for use on a pumped outlet septic tank or treatment plant where you want to spread the effluent out as much as possible to ensure you do not clog your media. This filter will act as a second level of filtration and will keep orifice lines clean. This unit is suitable for installation on a pump pipeline after treatment with a max flow of 300 l/min...
Klargester Bronze Service Plan (Domestic Tanks Only)
Klargester Bronze Service Plan (Domestic Tanks Only)
Ensure that your Klargester system is properly managed and non-polluting by allowing Kingspan to help you keep your system in good working order. By purchasing a Kingspan Bronze Service plan you will ensure that your system is serviced on an annual basis, our engineers will conduct checks on; system integrity and operation, all moving parts, effluent...
P006-012 HOSE REDUCER
P006-012 Hose Reducer
5/8" ID to 1/2" ID Unequal Hose Reducer
Blue Tefen Nylon Fitting
Small Grey Kiosk
Small Grey Kiosk
Strong Polypropylene Plastic Kiosk complete with small lock and keys.
406mm wide
330mm deep
686mm high
Stainless Steel Hose Fixing
Stainless Steel Hose Fixing
25-35mm
€9.20 delivery will be added at the Shopping Cart
UV DISINFECTION EFFLUENT FILTER
UV DISINFECTION EFFLUENT FILTER
For a complete solution to meet even the most stringent environmental permit requirements, the PL-UV1 UV Disinfection Unit reduces bacteria levels from secondary effluent to achieve strict water quality standards. The reliability and performance of the PL-UV1 is unmatched for onsite and decentralized treatment applications. Every component of the compact unit is highly...
ZABEL A1801 EFFLUENT FILTER
ZABEL A1801 EFFLUENT FILTER
Like the PL-68, this effluent filter is designed for residential applications. The effluent cartridge design allows for easy installation and maintenance and fits inside a standard 4″ tee with down leg pipe. It can easily be retrofitted into an existing septic tank. With 1.6mm filtration this filter comes with a built in gas deflector. It is designed for flows of...
EFFLUENT FILTER PL68 CARTRIDGE WITH HOUSING
PL68 EFFLUENT FILTER CARTRIDGE WITH HOUSING
The PL-68 effluent filter is designed for residential waste flows up to 3,000 litres per day. It has 68 linear feet of 1/16' filter slots. It is designed to fit a septic tank outlet pipe. It can also be fitted with a snap in gas deflector to ensure any gas bubbles are deflected away from the filter. This filter is supplied with the housing.
Specification:-
Offers...
EFFLUENT FILTER PL122
PL122 EFFLUENT FILTER
The PL122 effluent filter was the original filter. It was the first filter on the market with an automatic shut-off ball installed with every filter. When the filter is removed for regular servicing, the ball will float up and prevent any solids from leaving the tank. Our patented design cannot be duplicated. The PL-122 effluent filter is designed for residential waste flows...
EFFLUENT FILTER PL250
PL250 EFFLUENT FILTER
The PL250 effluent filter is designed for residential waste flows up to 11,400 litres per day. It has 250 linear feet of 1/16' filter slots. It is designed to fit a septic tank outlet pipe. This filter can be supplied with or without the handle.
Features:-
Flows of up to 3,000 GPD
250' of 1/16' filtration
360 deg of filtration
Cartridge cannot...
EFFLUENT FILTER PL525
PL525 EFFLUENT FILTER
The PL-525 effluent filter is designed for residential waste flows up to 38,000 litres per day. It has 525 linear feet of 1/16' filter slots. It is design to fit a septic tank or treatment system outlet pipe. The PL-525 effluent filter is unique in design with an automatic shut off ball installed with every filter. When the filter is element is removed for servicing the...
EFFLUENT FILTER PL625
PL625 EFFLUENT FILTER
The PL-625 effluent filter is designed for residential waste flows up to 38,000 litres per day. It has 625 linear feet of 1/32' filter slots. It is design to fit a septic tank or treatment system outlet pipe. The PL-625 effluent filter is unique in design with an automatic shut off ball installed with every filter. When the filter is element is removed for servicing the...
1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS Chain & Link Set for BA or BB Biodisc
1/2 BS Chain & Link Set - Biodisc replacement chain - Can be used on Biodisc Sewage Treatment Systems. This chain can be measured from centre to centre of each link.
Strong,
Simple,
Versitile,
Reliable
This chain comes as standard 5 foot in length
1/2' HOSE CLEAR BRAIDED per metre
1/2' Clear Braided Hose SOLD PER METRE
BioTec P4 to P25 and Airflow 1 to 4.
This is a 1/2 inch clear reinforced hose which can also be used to connect the airlift to the manifold within BioTec P40 and Airflow AF5 upwards.
Sold as a continual length
Non-returnable once ordered and cut
1120mm BA/BB BIODISC BELT (post 2006)
1120mm BA/BB BIODISC BELT (post 2006)
Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured post 2006.
1600mm BA/BB BIODISC BELT (pre 2006)
1600mm BA/BB BIODISC BELT (pre 2006)
Replacement heavy duty drive belt to suit Klargester BA/BB BioDiscs manufactured pre 2006
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
Air Filter to suit ET-60 and ET-80 Charles Austen Blower
AIR LINE REGULATING VALVE 1/2'
AIRLINE REGULATING VALVE 1/2"
1/2 inch airline valve for P6 to P12 unit's
B1-FA-Panasonic-Pinion-Wheel
B1-FA-Panasonic-Pinion-Wheel
Panasonic pinion wheel is suitable for Klargester B1 to BF treatment systems. Suited for panasonic gearboxes.
BA COVER (BIODISC)
BA COVER (BIODISC)
Cover/Lid for Biodisc BA-BB-BAX comes complete with 2 x Locks.
Materials: Glass Reinforced Plastic (GRP) with a cloloured Gel Coat Weather Exterior.
BA Rotor Assembly Complete
BA Rotor Assembly Complete
Full rotor pack for 1 x BA Biodisc
This product is made to order, lead time 2 to 3 weeks.
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB-Biodisc-Lid-Extension-Neck-300mm
BA-BB- Invert 300mm extension neck - allows sewage treatment system to set at the correct level to achieve the recommended gradient for the external pipework
Materials:Glass Reinforced Plastic (GRP)
BA-BC BIODISC SMART ALARM KIT
BA-BC Biodisc Smart Alarm kit
Suitable for lots of unit's that need to have a high level alarm - this is great for any Cesspool or Small Pump-chamber to advise when unit is full. Also a small discharge pump or Air-blower can be wired into this panel.
Kit Includes :-
Control Panel
Low Voltage Beacon
High Level Float Switch
Lose of Rotation
BA/BB BioDisc Bottom Pulley
BA/BB BioDisc Bottom Pulley
Bottom pulley to suit the Klargester BA, BA-X and BB BioDisc Sewage Treatment Systems.
Bottom Pulley suitable for the shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant
80 Teeth
8mm Pitch
20mm Wide High Torque Drive Pulley
Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when...
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
Come complete with:
1no pump chamber
1no 300 x 200 x 9mm Polypropylene Sheet
1no BA-BB Biodisc IPS Manifold -
Automatic Pump
BATTERY PACK FOR GREEN CONTROL PANEL
BATTERY PACK FOR GREEN CONTROL PANEL
Replacement battery pack for Green Control Panel.
BC 1/2 Nylon Bearing
BC 1/2 Nylon Bearing
This is a Klargester half bearing to fit the non-drive end of a Klargester BioDisc BC Sewage Treatment System.
30mm wide
BC BioDisc Bearing Kit
BC BioDisc Bearing Kit
Klargester BC BioDisc Bearing kit for the drive end.
The BC drive end bearing for BioDisc is a complete nylon bearing with a grey bush insert & is suitable for all the Klargester BC BioDisc Sewage Treatment Systems (30mm).
BC BioDisc Bottom Pulley
BC BioDisc Bottom Pulley
The Klargester BC bottom pulley fits onto the shaft of all BC Biodisc sewage treatment systems.
30mm wide
8mm pitch
65mm Plain Bored
80 Teeth
Torerance H9
Note, when changing these the locking elemenet needs removed first. It is advised that the locking emement is changed when changing the botttom pulley
BC BioDisc Whole Bearing (Drive End)
BC BioDisc Whole Bearing (Drive End)
Klargester BC BioDisc Whole Bearing for the drive end. A Klargester BC BioDisc nylon bearing for the Klargester BC BioDisc Sewage Treatment Systems (30mm) and comes with a grey insert.
BC Pulley Locking Element
BC Pulley Locking Element
This locking element can be used both on the BC sewage treatment systems. It is used to clamp the bottom pulley onto the main shaft.
BC Top Pulley for Sewage Treatment Plant
Top Pulley for BC BioDisc Sewage Treatment Plant
Top Pulley suitable for the motor shaft of the Klargester BA/BB BioDisc Sewage Treatment Plant
24 Teeth
8mm Pitch
H7 Tolerence
30mm Wide High Torque Drive Pulley
Bored 18mm
6mm Grubscrew hole above keyway centrally in tooth Face
6mm Grubscrew Supplied
British Standard Keyway
BD Metal Top Retaining Plate for Front Bearing
BD Metal Top Retaining Plate for Front Bearing
Used on BD Biodisc
BD/BE BEARING BUSH HALF x 2no
BD/BE Bearing Bush Half x 2no
This is a bearing bush half for a 40mm Diameter shaft. Suitable for Klargester BD/BE Biodisc. We recommend this is ordered with part 0002820
Comes as a pair of 2no
BD/BE BEARING HOUSING
BD/BE BEARING HOUSING
The BD/BE Half Bearing is suitable for 40mm diameter shafts in all Klargester BD/BE BioDisc Sewage Treatment Systems.
This listing is for one single half bearing (Each Biodisc contains 2)
BD/BE Bottom Pulley for Biodisc
BD BioDisc Bottom Pulley
The BD BioDisc Bottom Pulley fits the main media shaft on all Klargester BD BioDisc Sewage Treatment Systems.
A BD BioDisc Locking Element is also available separately, to lock the sprocket onto the shaft.
Wastewater Accessories FAQs
What is a distribution box on a septic tank?
A distribution box is used to divide the effluent flow from a septic tank into two or more percolation areas.
Is distribution box necessary?
The distribution box is a major part of the septic system being able to function properly is very important. If the distribution box isn't working the right way you will soon be dealing with percolation field failure.
What is the difference between septic tank and distribution box?
The septic system works by sending wastewater from your home through pipes that take it to a septictank. From there, the wastewater goes through more pipes to the distribution box. This distribution box distributes the wastewater evenly through field lines into the percolation area.