• display as grid Grid
  • display as list List
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |

BIOFICIENT FILTER MEDIABIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA
BIOFICIENT FILTER MEDIA Wastewater is treated in relatively small aeration tank partially filled with these moving bed media aerated filters. ("Hair Curlers"), providing a surface where a biofilm can grow. Oxygen is introduced via bubble diffused air also moving around the media. The media design gives a high surface area which promotes the growth of bacteria and other organisms (biomass)...
from €135.27 ex VAT
(€166.38 inc VAT)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120)
JDK-L CONNECTOR (60-120) This Secoh JDK Connector is for all models from 60 - 120. It is 3/4 inch in diameter. This part should be replaced if showing any signs of damage or cracks. This will help with the longevity of the blower.
€33.19 ex VAT
(€40.82 inc VAT)

JDK-PRESSURE RELIEF VALVE (150-500)
JDK-PRESSURE RELIEF VALVE (150-500)
JDK-PRESSURE RELIEF VALVE (150-500) This Secoh JDK Pressure Releif Valve can be used with all Secoh JDK Airblowers from 150 to 500. The valve will prolong the lifespan of your airblower and release any excess air to prevent the internal workings of the blower from being damaged. Original Black Rubber 90 Degree Hose 2 x Spring Clip Retainers Diameter: 25.4mm
€41.38 ex VAT
(€50.90 inc VAT)
QUARTER TURN LOCK
QUARTER TURN LOCK
QUARTER TURN LOCK
€15.87 ex VAT
(€19.52 inc VAT)

SECOH JDK-40 SINGLE SERIES BLOWER
SECOH JDK-40 SINGLE SERIES BLOWER
SECOH JDK-40 SINGLE SERIES BLOWER The JDK blower models are a direct replacement of the Secoh EL series of blower. They feature up to 30% less energy consumption, as well as being more compact than the EL series. This blower model is to be used in the Biosafe/ CLP6 unit, located on the inside of the unit.
€121.70 ex VAT
(€149.69 inc VAT)
BLOWER HOUSING CATCH/CLIPBLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP
BLOWER HOUSING CATCH/CLIP If you need a full set of clips, order x4 clips. These clips match the blower housing on the below link : - Kingspan Parts Blower Housing (Complete) A delivery charge of €9.20 + vat will be added to the order at the checkout.
€0.06 ex VAT
(€0.07 inc VAT)

STUD COUPLING (6MM)STUD COUPLING (6MM)
STUD COUPLING (6MM)
STUD COUPLING (6MM) To allow connection of the PPFDS pipework into the Control Panel
€16.89 ex VAT
(€20.77 inc VAT)
BIOTEC P12 SCREEN ASSEMBLYBIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY
BIOTEC P12 SCREEN ASSEMBLY 1no Airlift Baffle 2no Scum Baffles 8no Rivet Tapt
€563.53 ex VAT
(€693.14 inc VAT)

BIOTEC P6 SCREEN ASSEMBLYBIOTEC P6 SCREEN ASSEMBLY
BIOTEC P6 SCREEN ASSEMBLY
BIOTEC P6 SCREEN ASSEMBLY 1no Airlift Baffle 2no Scum Baffles 8no Rivet Tapt
€458.75 ex VAT
(€564.26 inc VAT)
KLARGESTER BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P18-P25KLARGESTER BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P18-P25
KLARGESTER BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P18-P25
KLARGESTER BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P18-P25
€366.26 ex VAT
(€450.50 inc VAT)

P006 BALE
P006 BALE
P006 Bale Come complete with strapping, buckles and Enkamat matting to suit.
€268.80 ex VAT
(€330.62 inc VAT)
PUMPWELL (1 METRE) PIPEWORK
PUMPWELL (1 METRE) PIPEWORK
PUMPWELL (1 METRE) PIPEWORK
€172.29 ex VAT
(€211.92 inc VAT)

PUMPWELL (1.5 METRE) PIPEWORK
PUMPWELL (1.5 METRE) PIPEWORK
PUMPWELL (1.5 METRE) PIPEWORK
€208.68 ex VAT
(€256.68 inc VAT)
PUMPWELL ASSEMBLYPUMPWELL ASSEMBLY
PUMPWELL ASSEMBLY
Pumpwell Assembly 1no IPS Pumpwell 2no Scrum Baffle To be used to convert your gravity system into an IPS unit (Pumped Outlet)
€119.40 ex VAT
(€146.86 inc VAT)

ACCESS COVER KEY
ACCESS COVER KEY
ACCESS COVER KEY Access cover keys for all Klargester Domestic Sewage Treatment Plants
€15.24 ex VAT
(€18.75 inc VAT)
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER
AIR FILTER FOR ET60 - ET80 BLOWER Air Filter to suit ET-60 and ET-80 Charles Austen Blower
€14.59 ex VAT
(€17.95 inc VAT)

BIODISC / BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
BIODISC / BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK
BIODISC/ BIOTEC SEWAGE TREATMENT SYSTEM MAIN COVER LOCK Suitable to fit all BioTec unit lids and P006-P012 BioTec and also suit the BA BioDisc systems. Please note 2 cover locks are required to secure the lids.
€15.74 ex VAT
(€19.36 inc VAT)
BIOTEC BLOWER COVER BOX
BIOTEC BLOWER COVER BOX
BIOTEC BLOWER COVER BOX
€32.47 ex VAT
(€39.94 inc VAT)

BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P6-P12
BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P6-P12
BIOTEC SEWAGE TREATMENT PLANT OUTER COVER P6-P12 Outer cover and surf board together P6-P12
€968.76 ex VAT
(€1,191.57 inc VAT)
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE
BIOTEC SEWAGE TREATMENT SYSTEM DISTRIBUTION CONE The Klargester BioTec Distribution Cone is a blue plastic effluent distribution head which is placed on the end of the pipework to diffuse effluent by spraying directly over the media. Suitable for the Klargester BioTec 1, 2, 3 and 4 sewage treatment systems
€13.44 ex VAT
(€16.53 inc VAT)

ET-120 CHARLES AUSTEN BLOWERET-120 CHARLES AUSTEN BLOWER
ET-120 CHARLES AUSTEN BLOWER
ET-120 CHARLES AUSTEN BLOWER Designed for use in sewage aeration applications, the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key...
from €248.39 ex VAT
(€305.52 inc VAT)
ET-150 CHARLES AUSTEN BLOWERET-150 CHARLES AUSTEN BLOWER
ET-150 CHARLES AUSTEN BLOWER
ET-150 CHARLES AUSTEN BLOWER Designed for use in sewage aeration applications the Charles Austen ET Enviro air pump range is situated outside the sewage treatment for aeration of waste water in the first stage of treatment. Other applications include aeration for Koi ponds and spa's/whirlpools, rainwater harvesters, cellar emptying, swimming pool emptying, flood prevention and fuel cell manufacture. Key...
from €366.26 ex VAT
(€450.50 inc VAT)

1/2 BS CHAIN & LINK SET FOR BA OR BB BIODISC
1/2 BS Chain & Link Set for BA or BB Biodisc 1/2 BS Chain & Link Set - Biodisc replacement chain - Can be used on Biodisc Sewage Treatment Systems. This chain can be measured from centre to centre of each link. Strong, Simple, Versitile, Reliable This chain comes as standard 5 foot in length
€98.22 €86.41 ex VAT
(€106.28 inc VAT)
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP
BA/BB CONVERSION KIT GRAVITY TO IPS PUMP Come complete with: 1no pump chamber 1no 300 x 200 x 9mm Polypropylene Sheet 1no BA-BB Biodisc IPS Manifold - Automatic Pump
€556.41 ex VAT
(€684.38 inc VAT)

BD/BE/BF DUPLEX DRIVE CHAIN - 102 PITCHES
BD/BE/BF DUPLEX DRIVE CHAIN - 102 PITCHES
BD/BE/BF Duplex Drive Chain - 102 pitches The BD/BF 5/8" duplex drive chain is suitable for all Klargester BD/BE/BF BioDiscs (2m length)
€98.15 ex VAT
(€120.72 inc VAT)
BF MOTOR/GEARBOX (BAUER)
BF MOTOR/GEARBOX (BAUER)
BF Motor/Gearbox (Bauer) This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. Bauer 2000 Series helical geared motor Supply: 230V/50Hz/1PH Output power 0.120 kW Output torque 136 Nm Output speed 8.3 rpm Terminal box mounting B3 Terminal box position I/A Terminal...
€1,009.95 ex VAT
(€1,242.24 inc VAT)

BG BIODISC DUPLEX CHAIN - 2 METRES
BG BIODISC DUPLEX CHAIN - 2 METRES
BG BIODISC DUPLEX CHAIN - 2 METRES The BG 3/4" duplex drive chain is suitable for all Klargester BG BioDiscs (2m length)
€115.85 ex VAT
(€142.50 inc VAT)
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER)
BG MOTOR GEARBOX (BAUER) This Bauer BG40 Motor/Gearbox is used with the Klargester BG Biodisc units. Supply: 230V/50Hz/1PH Output power: 0.180 kW Output torque: 280 Nm Output speed: 6.1 rpm
€1,437.00 ex VAT
(€1,767.51 inc VAT)

BIODISC BA/BB RADIAL ARMBIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM
BIODISC BA/BB RADIAL ARM This galvanised steel angle Radial Arm for BA-BB biodisc sewage treatment plant, this part hold the discs in place and stops them from turning individually.
€30.86 ex VAT
(€37.96 inc VAT)
CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX
CAPACITOR 10SL BF MOTOR GEARBOX 10SL Microfarad Motor Run Capacitor used on the Bauer 2000 Series helical geared motor This Bauer Motor/Gearbox is used with the Klargester BF Biodisc units. ( Product Ref: 0012363 )
€91.11 ex VAT
(€112.07 inc VAT)

CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR
CAPACITOR FOR BAUER BG10Z MOTOR 8SL Microfarad Motor Run Capacitor used on the BG10Z Bauer Motor Gearbox. This motor is used on BC, BD & BE BioDisc's - motor product code is 0013114 .
€76.75 ex VAT
(€94.40 inc VAT)
STEPHAN TO PANASONIC CONVERSION KIT
Sale
STEPHAN TO PANASONIC CONVERSION KIT
STEPHAN TO PANASONIC CONVERSION KIT This is a conversion kit to suit a peripheral drive. It includes the Panasonic Motor Gearbox, pulley & mount as well as ancillaries.
€682.88 €639.35 ex VAT
(€786.40 inc VAT)

24 VAC Impulse Relay
24 VAC Impulse Relay
24 VAC Impulse Relay These realys are used in Klargester Biodiscs, Biotecs and Bioficients, The contacts are actuated with every current pulse and they stay in the operating position they have adopted in each case until the next pulse occurs. It is possible to actuate the contacts manually by pressing a pushbutton provided on the unit. The contact position is shown by an indicator. The units can...
€87.00 ex VAT
(€107.01 inc VAT)
BC,BD,BE MOTOR/GEARBOX (BAUER)
BC,BD,BE MOTOR/GEARBOX (BAUER)
BC,BD,BE MOTOR/GEARBOX (BAUER) This is a Bauer BG10 Motor and Gearbox suitable for the Klargester BC, BD and BE Biodisc Sewage Treatment Systems. The motor and gearbox is pre-installed with a start/run capacitor and keyway steel. The motor & gearbox also includes an information booklet with wiring diagrams. Type:BG10Z-11/ECO4LA4/SP Phase:Single Voltage:240V Shaft Size:20mm
€535.82 ex VAT
(€659.06 inc VAT)

BIODISC BA/BB LID EXTENSION NECK 500mm
BIODISC BA/BB LID EXTENSION NECK 500mm
BA/BB BIODISC LID EXTENSION NECK 500mm Allows sewage treatment system to set at the correct level to achieve the recommended gradiant for the external pipework
€305.34 ex VAT
(€375.57 inc VAT)
BIODISC BA/BB NYLON WASHERS
BIODISC BA/BB NYLON WASHERS
BA/BB BIODISC NYLON WASHERS PRICE IS FOR SINGLE WASHER** BA / BB BioDisc Nylon spacer washers used for the shaft. We recommend to order x6 in total. A delivery charge of €9.20 + vat will be added to the order at the checkout.
€1.09 ex VAT
(€1.34 inc VAT)

BIODISC BB ROTOR PACKBIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK
BIODISC BB ROTOR PACK Klargester BB Rotor Pack is a replacement sewage treatment assembly to suit the BB range of Biodisc.
€1,785.42 ex VAT
(€2,196.07 inc VAT)
BIODISC BA-BB DRIVE ASSEMBLY (POST 2006 MODELS) KIT 3
Sale
BIODISC BA-BB DRIVE ASSEMBLY (POST 2006 MODELS) KIT 3
BIODISC BA-BB DRIVE ASSEMBLY (POST 2006 MODELS) KIT 3 This is for the Post 2006 Models of the BA/BB Bio Disc. This is a full drive assemlbly replacement kit including the motor, capacitor, belt, both pulleys & locking element. The BA-BB Bio Disc Drive Assembly Kit 3 includes :- x1 Panasonic Motor-Gearbox - 0015500 x1 Short 1120mm Belt - 0012828 x1 Top Pulley - 0013725 x1 Bottom...
€373.47 €358.17 ex VAT
(€440.55 inc VAT)

BIODISC GRAB HANDLE
BIODISC GRAB HANDLE
BIODISC GRAB HANDLE Black plastic Klargester Biodisc Handle to suit cover
€21.48 ex VAT
(€26.42 inc VAT)
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION
BIODISC MAGNET ONLY - LOSS OF ROTATION Magnet for Loss of Rotaion Alarm on a BioDisc. If you need the full kit see below :- Kingspan Parts Loss of Rotation Kit
€21.44 ex VAT
(€26.37 inc VAT)

PERIPHERAL DRIVE WHEEL FOR B1 B2 BIODISC
PERIPHERAL DRIVE WHEEL FOR B1 B2 BIODISC
PERIPHERAL DRIVE WHEEL FOR B1 B2 BIODISC PERIPHERAL DRIVE WHEEL 61 TEETH To suit B1, B2, FA, FB, FC BIODISC
€1,263.02 ex VAT
(€1,553.51 inc VAT)
19' RETROFIT GREEN SCREW CAP
19' RETROFIT GREEN SCREW CAP
19'' RETROFIT GREEN SCREW CAP 19 inch retrofit lid includes sealant lid
€87.82 ex VAT
(€108.02 inc VAT)

2" ALUMINIUM LOCKABLE FILL CAP2" ALUMINIUM LOCKABLE FILL CAP
2" ALUMINIUM LOCKABLE FILL CAP
2" ALUMINIUM LOCKABLE FILL CAP This Aluminium Locking Fuel Cap is designed to cap off the pipe threads on fuel tanks in order to prevent dripping and secure their fill points. This oil tank lock, which ensures that only authorised users can access a tank's fuel, consists of two separately sold parts; a two ring lugged cap and a fill pipe adaptor. The fill pipe adaptor fits to the male...
€48.80 ex VAT
(€60.02 inc VAT)
4 inch LOCKABLE OIL TANK LID4 inch LOCKABLE OIL TANK LID
4 inch LOCKABLE OIL TANK LID
4 inch LOCKABLE OIL TANK LID 4" Lockable Oil Tank Inspection Cap in oil resistant polymer. Suitable for retrofit to Harlequin tanks incorporating an existing 4" Inspection Aperture and Screw Cap. Accepts key or combination padlocks providing a visible deterrent against fuel theft. Supplied complete with: 4" Cap and brackets Self tapping screws Dipstick attachment point Suitable...
€39.66 ex VAT
(€48.78 inc VAT)

8' OIL TANK LID
8' OIL TANK LID
8'' OIL TANK LID 8 Inch lid (c/w bar and pin) for old oil tanks
€34.85 ex VAT
(€42.87 inc VAT)
ATLAS 16' OIL TANK LID BLUEATLAS 16' OIL TANK LID BLUE
ATLAS 16' OIL TANK LID BLUE
ATLAS 16" OIL TANK LID BLUE Replacement lockable 16" lid (approx. dimension) for ATLAS bunded oil tanks only. 16" diameter manhole lid 'Quarter Turn' style Manhole Access Point. Supplied complete with: Lockable Plastic Manhole Lid Retention Ring Weatherproof Gasket
€78.68 ex VAT
(€96.78 inc VAT)

ATLAS 18' OIL TANK LIDATLAS 18' OIL TANK LID
ATLAS 18' OIL TANK LID
ATLAS 18'' OIL TANK LID Replacement lockable 18'' lid (approx. dimension) for ATLAS bunded oil tank only. New Style; operated by silver key Old Style; operated by triangle plastic key
€50.23 ex VAT
(€61.78 inc VAT)
ATLAS 6' OIL TANK LIDATLAS 6' OIL TANK LID
ATLAS 6' OIL TANK LID
ATLAS 6'' OIL TANK LID Replacement 6'' (approx. dimension) lid (including steel pin and R clip) for a ATLAS oil tank only. Fits onto the tank inspection point/inlet.
€35.20 ex VAT
(€43.30 inc VAT)
Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |